/live/media/PR/PR_BD920100_Fro.jpg)
DuraGo BD920100 Brake Drum - Rear
| Brand | DuraGo BD920100 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 3.94 |
| Bolt Circle Diameter | 100 |
| Bolt Hole Diameter | 0.58 |
| Bolt Hole Diameter | 14.7 |
| Bolt Hole Quantity | 4 |
| Brake Surface Width | 1.62 |
| Brake Surface Width | 41.1 |
| Center Hole Diameter | 2.17 |
| Center Hole Diameter | 55 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 7.91 |
| Maximum Brake Diameter (Discard) | 201 |
| Nominal Drum Diameter | 7.87 |
| Nominal Drum Diameter | 199.9 |
| Outer Cooling Fins | No |
| Outside Diameter | 9.53 |
| Outside Diameter | 242 |
| Overall Height | 2.05 |
| Overall Height | 52.1 |
| Rust Resistant Coating | No |
| Fits | Scion · 6 vehicles |
Cast iron construction. Full-cast design delivers dependable braking performance.
Brake drum design. Built for consistent stopping power and smooth operation.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references Anchor 9735, FEL-PRO 35088 and 920100 for the same application. See all 11.
DuraGo BD920100 Rear Brake Drum
The DuraGo BD920100 is a cast iron rear brake drum built for direct replacement service on select Scion applications. It is engineered for fit, form, and function with cataloged coverage for 2004-2006 Scion xA and 2004-2006 Scion xB rear brake service.
For drivers searching for a rear brake drum for 2004-2006 Scion xA or a rear brake drum for 2004-2006 Scion xB, this part number BD920100 provides the core dimensions and construction needed for a proper drum brake repair.
- Cast iron construction for durable brake service
- Full cast design
- Nominal drum diameter: 199.9 mm / 7.87 in
- Maximum brake diameter (discard): 201 mm / 7.91 in
- Outside diameter: 242 mm / 9.53 in
- Brake surface width: 41.1 mm / 1.62 in
- Bolt hole quantity: 4
- Bolt circle diameter: 100 mm / 3.94 in
- Center hole diameter: 55 mm / 2.17 in
- Overall height: 52.1 mm / 2.05 in
DuraGo manufactures brake drums through ISO-certified factories and focuses on catalog accuracy and OE-style fitment. The BD920100 is a rear brake drum for Scion xA and Scion xB applications where the original drum needs replacement due to wear, scoring, or out-of-spec diameter. This part number BD920100 cross-references Anchor 9735 for the same application.
Common Uses
- Replacing a worn rear drum on 2004-2006 Scion xA
- Replacing a worn rear drum on 2004-2006 Scion xB
- Correcting brake pulsation or uneven rear braking caused by drum wear
- Restoring proper shoe contact when the drum has exceeded discard diameter
- Addressing scoring, heat damage, or out-of-round drum surfaces
Installation Notes
Verify drum diameter, bolt pattern, center hole diameter, and brake surface width before installation. Inspect rear brake shoes, wheel cylinders, and hardware condition during service, and measure the existing drum against the discard specification of 201 mm / 7.91 in. Confirm rear-position application for 2004-2006 Scion xA and 2004-2006 Scion xB before final assembly.
Quality Assurance
DuraGo backs this brake drum with manufacturing standards centered on fit, form, and function. The part is produced in ISO-certified factories and built to meet the dimensional requirements expected for professional brake service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2006 | Scion | xA | Rear | — |
| 2006 | Scion | xB | Rear | — |
| 2005 | Scion | xA | Rear | — |
| 2005 | Scion | xB | Rear | — |
| 2004 | Scion | xA | Rear | — |
| 2004 | Scion | xB | Rear | — |
| No rows match your filter. | ||||