/live/media/PR/PR_BD92011401_Fro.jpg)
DuraGo BD920114-01 Brake Drum - Rear
| Brand | DuraGo BD920114-01 |
|---|---|
| Position | Rear |
| Material | Cast iron |
| Maximum Brake Diameter (Discard) | 230 |
| Maximum Brake Diameter (Discard) | 9.06 |
| Bolt Hole Diameter | 0.51 |
| Bolt Hole Diameter | 12.9 |
| Rust Resistant Coating | Yes |
| Bolt Hole Quantity | 4 |
| Overall Height | 2.36 |
| Overall Height | 60 |
| Outside Diameter | 10.42 |
| Outside Diameter | 264.7 |
| ABS Tone Ring Included | No |
| Outer Cooling Fins | No |
| Nominal Drum Diameter | 228.6 |
| Nominal Drum Diameter | 9 |
| Center Hole Diameter | 2.68 |
| Center Hole Diameter | 68 |
| Bolt Circle Diameter | 114.3 |
| Bolt Circle Diameter | 4.5 |
| Brake Surface Width | 2.01 |
| Brake Surface Width | 51 |
| Construction | Full cast |
| Fits | Nissan · 18 vehicles |
Corrosion-resistant coating. Provides lasting protection for the brake drum exterior.
Full cast construction. Delivers solid, dependable braking performance.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references 43206CJ90A, 43206ET00A and 43206ET000 for the same application. See all 3.
DuraGo Brake Drum for Rear Nissan Applications
The DuraGo Titanium Series brake drum, part number BD920114-01, is built for rear brake service on select Nissan Cube, Sentra, and Versa models. It combines cast iron construction with a rust-resistant coating and a titanium gray finish that suits open-wheel vehicle designs.
Key Features
- Cast iron, full-cast brake drum construction
- Rust-resistant coating on the exterior for added corrosion defense
- Titanium gray finish for a clean appearance on exposed wheel setups
- Nominal drum diameter: 9 in. (228.6 mm)
- Outside diameter: 10.42 in. (264.7 mm)
- Brake surface width: 2.01 in. (51 mm)
- 4-bolt pattern with 4.5 in. bolt circle diameter
- Center hole diameter: 2.68 in. (68 mm)
- Manufactured in an ISO certified factory to support fit, form, and function requirements
Detailed Description
DuraGo BD920114-01 is a rear brake drum engineered for direct replacement service on 2007-2012 Nissan Sentra, 2007-2012 Nissan Versa, and 2009-2014 Nissan Cube rear brake applications. The drum is made from cast iron and finished with a corrosion-resistant coating on the hat and edge to help protect exposed surfaces from rust. DuraGo’s Titanium Series design also adds a titanium gray appearance that complements vehicles with open wheel designs. This part number, BD920114-01, is manufactured in an ISO certified facility and built to meet fit, form, and function requirements for the listed Nissan applications.
This part cross-references Nissan OE numbers 43206CJ90A and 43206ET00A for the same application.
Common Brake Drum Replacement Issues
- Rear brake pulsation or uneven braking from a worn drum surface
- Rust buildup on the drum exterior or hat area
- Out-of-spec drum diameter after wear or machining limits are reached
- Brake noise caused by surface scoring or corrosion
- Reduced braking consistency on rear drum brake systems
Installation Notes and Tips
Verify rear fitment by year, make, and model before installation. Confirm the drum diameter, bolt circle, bolt hole diameter, and center hole dimensions against the vehicle hub and brake assembly. Inspect rear shoes, hardware, and wheel cylinders during service so the new drum can seat against a clean, even braking surface. For 2009-2014 Nissan Cube rear brake service, 2007-2012 Nissan Sentra rear brake service, and 2007-2012 Nissan Versa rear brake service, follow the vehicle service manual for torque and adjustment procedures.
Quality Assurance
DuraGo manufactures this brake drum in an ISO certified factory and applies its Titanium Series corrosion-resistant finish to help protect the exterior surfaces. The design reflects DuraGo’s experience in brake components and is built to meet fit, form, and function requirements for the listed Nissan rear applications.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2014 | Nissan | Cube | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2013 | Nissan | Cube | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2012 | Nissan | Cube | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2012 | Nissan | Sentra | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2012 | Nissan | Versa | 1.8L | L4 | Rear | Coated Hat and Edge for Rust Resistance |
| 2011 | Nissan | Cube | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2011 | Nissan | Sentra | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2011 | Nissan | Versa | 1.8L | L4 | Rear | Coated Hat and Edge for Rust Resistance |
| 2010 | Nissan | Cube | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2010 | Nissan | Sentra | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2010 | Nissan | Versa | 1.8L | L4 | Rear | Coated Hat and Edge for Rust Resistance |
| 2009 | Nissan | Cube | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2009 | Nissan | Sentra | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2009 | Nissan | Versa | 1.8L | L4 | Rear | Coated Hat and Edge for Rust Resistance |
| 2008 | Nissan | Sentra | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2008 | Nissan | Versa | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2007 | Nissan | Sentra | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2007 | Nissan | Versa | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| No rows match your filter. | ||||||