/live/media/PR/PR_BD920182_Fro.jpg)
DuraGo BD920182 Brake Drum - Rear
| Brand | DuraGo BD920182 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Bolt Circle Diameter | 3.94 |
| Bolt Circle Diameter | 100 |
| Bolt Hole Diameter | 0.5 |
| Bolt Hole Diameter | 12.6 |
| Bolt Hole Quantity | 4 |
| Brake Surface Width | 1.52 |
| Brake Surface Width | 38.5 |
| Center Hole Diameter | 2.4 |
| Center Hole Diameter | 61 |
| Construction | Full Cast |
| Material | Cast Iron |
| Maximum Brake Diameter (Discard) | 7.91 |
| Maximum Brake Diameter (Discard) | 201 |
| Nominal Drum Diameter | 7.87 |
| Nominal Drum Diameter | 200 |
| Outer Cooling Fins | No |
| Outside Diameter | 9.69 |
| Outside Diameter | 246.2 |
| Overall Height | 2.12 |
| Overall Height | 53.9 |
| Rust Resistant Coating | No |
| Fits | Honda · 6 vehicles |
Full cast construction. Delivers durable braking performance with cast iron strength.
Brake drum. A direct replacement for restoring dependable braking function.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references 42610T5RA01 for the same application. See all 1.
DuraGo BD920182 Rear Brake Drum
The DuraGo BD920182 is a cast iron rear brake drum built for 2015-2020 Honda Fit applications. It is engineered to match the required fit, form, and function for this rear brake service part, with dimensions that support proper drum brake operation on the Honda Fit.
Key Features
- Cast iron construction for durable brake service
- Nominal drum diameter: 200 mm (7.87 in.)
- Maximum brake diameter discard: 201 mm (7.91 in.)
- Outside diameter: 246.2 mm (9.69 in.)
- Brake surface width: 38.5 mm (1.52 in.)
- Bolt hole quantity: 4 with 100 mm (3.94 in.) bolt circle diameter
- Center hole diameter: 61 mm (2.4 in.)
- Full cast construction with 53.9 mm (2.12 in.) overall height
- Rear fitment for 2015-2020 Honda Fit
Detailed Description
DuraGo BD920182 is a rear brake drum for the Honda Fit, covering 2015-2020 model years. The drum is manufactured from cast iron in a full cast design and sized to the listed OE-style dimensions, including a 200 mm nominal drum diameter, 246.2 mm outside diameter, and 38.5 mm brake surface width. DuraGo’s brake drum and rotor program is built by ISO certified factories and focused on accurate cataloging and consistent fit, form, and function. This part cross-references Honda 42610T5RA01 for the same application.
Common Problems This Part Helps Address
- Rear brake drum wear that affects braking consistency
- Out-of-spec drum diameter from repeated service use
- Brake pulsation or uneven rear braking caused by drum surface wear
- Fitment issues when replacing a worn Honda Fit rear drum
- Noise or reduced braking performance from a damaged cast drum
Installation Notes and Tips
Verify rear drum dimensions, bolt pattern, and center bore before installation on the Honda Fit. Inspect brake shoes, wheel cylinders, and related rear brake components during service so the new drum can seat correctly. Clean the friction surface before assembly and confirm the drum does not exceed the maximum discard diameter. Fits 2015-2020 Honda Fit, rear.
Quality Assurance
DuraGo manufactures this brake drum through ISO certified factories and backs its brake program with a focus on dimensional accuracy and application-specific cataloging. Part number BD920182 is built to meet the fit, form, and function requirements expected for rear brake service on the Honda Fit.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2020 | Honda | Fit | Rear | — |
| 2019 | Honda | Fit | Rear | — |
| 2018 | Honda | Fit | Rear | — |
| 2017 | Honda | Fit | Rear | — |
| 2016 | Honda | Fit | Rear | — |
| 2015 | Honda | Fit | Rear | — |
| No rows match your filter. | ||||