DuraGo BP1347C Disc Brake Pad Set - Rear

Overview of DuraGo BP1347C Disc Brake Pad Set

The DuraGo BP1347C disc brake pad set is engineered for reliable braking performance on select INFINITI and Nissan vehicles. Designed with ceramic friction material and mechanical pad wear sensors, this set offers consistent stopping power and durability for models like the Nissan 370Z and INFINITI Q50.

• Ceramic friction material for smooth, quiet braking
• Slotted design to reduce heat and improve pad life
• Mechanical pad wear sensor included for timely maintenance alerts
• Chamfered edges to minimize noise and vibration
• Pad shims included to reduce brake squeal
• Iron backing plates with bonded friction material for structural integrity

Detailed Product Features and Specifications

The DuraGo BP1347C brake pads feature a ceramic friction material composition that balances effective stopping power with reduced brake dust and noise. Both inner and outer pads have a friction material thickness of 8.2 mm (0.32 inches) and an overall thickness of 13.8 mm (0.54 inches), ensuring adequate wear life. The pads are slotted to help dissipate heat during braking, which can improve performance and longevity. Chamfered edges further reduce noise and vibration during operation. The iron backing plates provide a solid foundation, with friction material securely bonded to prevent delamination. Mechanical pad wear sensors are included to alert drivers when replacement is needed, helping maintain safe braking conditions. Pad shims are also included to minimize squealing, although mounting hardware and abutment clips are not part of this set.

Compatible Vehicles and Applications

This disc brake pad set is compatible with a range of INFINITI and Nissan models, including the Nissan 370Z, FX50, G37, M37, M56, Q50, Q60, Q70, Q70L, QX70, and Z. The DuraGo BP1347C is designed to meet the braking requirements of these vehicles, providing a direct replacement for original equipment pads.

Common Issues Addressed by DuraGo BP1347C Brake Pads

• Brake noise and squealing caused by worn or low-quality pads
• Reduced braking performance due to heat buildup
• Premature pad wear without wear sensor alerts
• Brake dust accumulation on wheels
• Vibration or judder during braking

Installation Notes and Tips

When installing the DuraGo BP1347C brake pads, ensure the mechanical pad wear sensor is properly connected to maintain accurate wear monitoring. Although mounting hardware is not included, reuse existing hardware if in good condition or replace as necessary. Clean the caliper and rotor surfaces before installation to ensure proper pad seating. The included pad shims should be installed to reduce noise. Verify that the chamfered edges align correctly to minimize vibration. After installation, perform a brake bedding procedure as recommended by the vehicle manufacturer.

Quality Assurance and Warranty

DuraGo brake pads are manufactured to meet or exceed industry standards for safety and performance. The BP1347C set undergoes rigorous quality control to ensure consistent friction characteristics and durability. While specific warranty details may vary, DuraGo typically offers a limited warranty against defects in materials and workmanship. Consult product documentation or the manufacturer for exact warranty terms.