DuraGo BP623MS Disc Brake Pad Set - Front

Durable Semi-Metallic Disc Brake Pads for GM Vehicles

The DuraGo BP623MS disc brake pad set offers reliable stopping power and consistent performance for a range of General Motors vehicles. Designed with semi-metallic friction material and mechanical pad wear sensors, these brake pads provide dependable braking for models like the Chevrolet Camaro, Buick LeSabre, and Cadillac DeVille.

• Semi-metallic friction material for balanced durability and performance
• Mechanical pad wear sensor included for timely maintenance alerts
• Slotted and chamfered edges to reduce noise and improve pad bedding
• Backing plates made of iron with bonded friction material for secure attachment
• Pad shims included to minimize vibration and brake noise

Technical Specifications and Features

The DuraGo BP623MS brake pads feature an outer pad friction material thickness of 11.1 mm and an inner pad thickness of 12.4 mm, ensuring long-lasting wear. Both inner and outer pads have chamfered edges and slots to help dissipate heat and reduce brake fade during extended use. The friction material is bonded securely to iron backing plates with a thickness of 4.9 mm on the inner pad and 4.9 mm on the outer pad, providing structural integrity and consistent braking performance. Mechanical pad wear sensors are included to alert drivers when replacement is needed, helping maintain safe braking conditions. While mounting hardware and abutment clips are not included, pad shims are supplied to reduce noise and vibration.

Compatible Vehicles and Applications

This disc brake pad set is compatible with a variety of GM makes and models, including Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac. Specific models supported include the Buick LeSabre and Park Avenue, Cadillac DeVille, Eldorado, and Seville, Chevrolet Camaro and Lumina APV, Oldsmobile 88 and 98, Pontiac Firebird, Bonneville, Riviera, Silhouette, and Trans Sport. The DuraGo BP623MS is designed to meet the braking needs of these vehicles, providing a direct replacement for original equipment pads.

Common Issues Addressed by DuraGo BP623MS Brake Pads

• Brake noise and vibration caused by worn or uneven pads
• Reduced braking performance due to pad wear
• Brake fade from excessive heat buildup during heavy use
• Delayed pad replacement alerts without wear sensors
• Uneven pad wear leading to rotor damage

Installation Notes and Tips

When installing the DuraGo BP623MS brake pads, ensure the mechanical wear sensors are properly connected to maintain accurate wear monitoring. Although mounting hardware and abutment clips are not included, use existing hardware if in good condition or replace as necessary. Clean the caliper and rotor surfaces before installation to ensure proper pad seating. The included pad shims should be installed to reduce noise and vibration. Always follow vehicle-specific service manual instructions for torque specifications and safety precautions.

Quality Assurance and Warranty

DuraGo brake pads are manufactured to meet or exceed industry standards for safety and performance. The semi-metallic friction material composition provides a balance of durability and effective braking. While specific warranty details for the BP623MS are not provided, DuraGo products typically come with a limited warranty against defects in materials and workmanship. Consult product documentation or the manufacturer for exact warranty terms.