DuraGo BP795C Disc Brake Pad Set - Rear

Durable Ceramic Disc Brake Pads for Volvo Models

The DuraGo BP795C disc brake pad set offers reliable braking performance designed specifically for select Volvo vehicles. Engineered with ceramic friction material and slotted design, these pads provide consistent stopping power and reduced noise for Volvo S60, S70, S80, V70, and XC70 models.

• Ceramic friction material for smooth, quiet braking
• Slotted pads to help dissipate heat and reduce brake fade
• Chamfered edges to minimize noise and vibration
• Includes pad shims for proper fit and noise reduction
• Iron backing plates bonded to friction material for durability

Technical Specifications and Features

The DuraGo BP795C brake pads feature an outer pad friction material thickness of 0.44 inches (11.2 mm) and an inner pad thickness of 0.43 inches (11 mm), ensuring ample material for extended service life. Both inner and outer pads have a height of 2.12 inches (53.8 mm) and widths of approximately 4.87 inches (123.7 mm) outer and 4.83 inches (122.7 mm) inner. The overall thickness of the pads is 0.64 inches (16.3 mm) outer and 0.63 inches (16.1 mm) inner, with a 0.2 inch (5.1 mm) iron backing plate bonded securely to the friction material. The slotted design improves heat dissipation, while chamfered edges reduce noise and vibration during braking. This set does not include pad wear sensors or mounting hardware but comes with pad shims to ensure proper installation and noise control.

Compatible Volvo Models and Applications

This disc brake pad set is compatible with a range of Volvo vehicles, including the S60, S70, S80, V70, and XC70. The DuraGo BP795C is designed to meet the braking requirements of these models, providing consistent performance for daily driving and moderate use.

• Replaces worn or damaged brake pads on Volvo S60, S70, S80, V70, and XC70
• Addresses brake noise and vibration issues
• Improves braking response and pedal feel
• Helps reduce brake fade under normal driving conditions
• Suitable for regular grade braking applications

Installation Notes and Tips

When installing the DuraGo BP795C brake pads, ensure the rotor surface is clean and free of debris. Since mounting hardware and abutment clips are not included, reuse existing hardware if in good condition or replace as necessary. Properly install the included pad shims to reduce noise and ensure correct pad alignment. Check brake fluid levels and test brake pedal feel after installation. It is recommended to bed in the new pads according to Volvo manufacturer guidelines for optimal performance.

Quality Assurance and Warranty

DuraGo brake pads are manufactured to meet industry standards for safety and performance. The ceramic friction material and bonded iron backing plates provide durability and consistent braking. While specific warranty details for the BP795C are not provided, DuraGo products typically come with a limited warranty against defects in materials and workmanship. Consult product documentation or the manufacturer for exact warranty terms.