DuraGo BP803MS Disc Brake Pad Set - Front
OE Quality 60-Day Returns
DuraGo

DuraGo BP803MS Disc Brake Pad Set - Front

Brand DuraGo BP803MS
Position Front
Abutment Clips Included No
Backing Material Iron
Chamfered Edges Yes
Friction Material Attachment Bonded
Friction Material Composition Semi-metallic
Grade Type Regular
Inner Pad Friction Material Thickness 0.46
Inner Pad Friction Material Thickness 11.8
Inner Pad Height 2.28
Inner Pad Height 57.9
Inner Pad Overall Thickness 0.7
Inner Pad Overall Thickness 17.8
Inner Pad Plate Thickness 0.24
Inner Pad Plate Thickness 6
Inner Pad Width 6.47
Inner Pad Width 164.3
Mounting Hardware Included No
Outer Pad Friction Material Thickness 0.46
Outer Pad Friction Material Thickness 11.8
Outer Pad Height 2.28
Outer Pad Height 57.9
Outer Pad Overall Thickness 0.7
Outer Pad Overall Thickness 17.8
Outer Pad Plate Thickness 0.24
Outer Pad Plate Thickness 6
Outer Pad Width 6.47
Outer Pad Width 164.3
Pad Shims Included Yes
Pad Wear Sensor Included No
Pad Wear Sensor Type No Sensor
Slotted Yes
Fits Ford · 5 vehicles

Semi-metallic friction. Balanced for everyday braking control, comfort, and reliability.

Slotted and chamfered. Helps promote quieter operation and consistent pad performance.

Bonded construction. Uses an iron backing plate with pad shims included.

Cross-references Wagner Brake MX803, 10208030 and D803MS for the same application. See all 3.

$33.66Free shipping
In stock · usually ships same day before 1pm CST
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.

Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
Step 2 — Quantity
Order total $33.66
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.
Not what you need? See all Disc Brake Pad Set options

DuraGo BP803MS Front Brake Pads

DuraGo BP803MS is a front disc brake pad set for 1999-2003 Ford Windstar models. Built with semi-metallic friction material, slotted faces, and chamfered edges, it is designed for steady braking response, driver comfort, and consistent control in everyday driving.

Key Features

  • Fits 1999-2003 Ford Windstar, front
  • Semi-metallic friction material with bonded construction
  • Slotted design for braking performance and heat management
  • Chamfered edges for smoother pad engagement
  • Pad shims included for noise control
  • Iron backing plate with regular grade construction
  • Outer and inner pad thickness: 11.8 mm (0.46 in)
  • Overall pad thickness: 17.8 mm (0.7 in)

Detailed Description

The DuraGo BP803MS brake pad set is engineered for front brake service on the Ford Windstar from 1999 through 2003. It uses a semi-metallic friction formula selected for dependable stopping performance across a range of daily driving conditions, while the slotted pad face and chamfered edges support smoother operation and more controlled brake feel. The included shims help reduce noise, and the iron backing material adds structural support for consistent pad fit and function. This part cross-references Wagner Brake MX803 for the same application.

What This Brake Pad Set Helps Address

  • Brake squeal during normal stop-and-go driving
  • Reduced braking consistency from worn front pads
  • Poor pedal feel caused by aged friction material
  • Uneven pad wear on front disc brake service
  • Loss of control confidence during routine braking

Installation Notes and Tips

Install BP803MS on the front axle only and verify rotor condition before assembly. Clean the caliper bracket and pad contact points, and inspect the brake system for wear or damage that could affect pad performance. Because mounting hardware and abutment clips are not listed as included, confirm whether reusable hardware meets service standards before installation. Proper bedding-in after installation helps establish stable friction transfer and consistent braking response.

Quality Assurance

DuraGo manufactures brake friction products in ISO/TS 16949 certified facilities and states that its pad formulas are independently tested for wear and noise-squeal performance. The BP803MS is part of DuraGo’s brake program developed for everyday safety and reliability.

Related reading

This part fits 5 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelPositionNotes
2003FordWindstarFrontCompatible with vehicles requiring disc brake pad replacements.
2002FordWindstarFrontCompatible with vehicles requiring disc brake pad replacements.
2001FordWindstarFrontCompatible with vehicles requiring disc brake pad replacements.
2000FordWindstarFrontCompatible with vehicles requiring disc brake pad replacements.
1999FordWindstarFrontCompatible with vehicles requiring disc brake pad replacements.
Directly replaces or cross-references 3 part numbers
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
Wagner Brake — MX80310208030D803MS