DuraGo BP929C Disc Brake Pad Set - Front

Durago BP929C Disc Brake Pads Overview

The DuraGo BP929C disc brake pad set is engineered for reliable braking performance on select Saab and Subaru models. Designed with ceramic friction material and mechanical pad wear sensors, these brake pads provide consistent stopping power and durability for vehicles like the Subaru Forester, Impreza, Legacy, Outback, Baja, and Saab 9-2X.

• Ceramic friction material for quieter braking and reduced dust
• Slotted design to improve heat dissipation and reduce brake fade
• Mechanical pad wear sensor included for timely maintenance alerts
• Chamfered edges to minimize noise and vibration
• Pad shims included to ensure proper fit and reduce squeal
• Backing plate made of iron with bonded friction material for durability

Technical Details and Specifications

The DuraGo BP929C brake pads feature an outer and inner pad friction material thickness of 10.9 mm (0.43 inches), with an overall pad thickness of 16.8 mm (0.66 inches). Both inner and outer pads have a height of 56.9 mm (2.24 inches) and a width of 137.2 mm (5.4 inches). The friction material is bonded securely to an iron backing plate with a thickness of 5.9 mm (0.23 inches) on the inner pad and 0.23 inches on the outer pad. The slotted and chamfered design helps reduce heat buildup and noise during braking, while the mechanical wear sensor alerts drivers when pad replacement is needed. Mounting hardware is not included, but pad shims are provided to ensure a proper and quiet fit.

Compatible Vehicles and Applications

This disc brake pad set is compatible with the following vehicles:

• Saab 9-2X
• Subaru Baja
• Subaru Forester
• Subaru Impreza
• Subaru Legacy
• Subaru Outback

These pads are designed to meet the braking requirements of these models, providing consistent performance under regular driving conditions.

Common Issues Addressed by DuraGo BP929C Brake Pads

• Brake noise and squealing due to worn or low-quality pads
• Reduced braking efficiency from overheated or glazed pads
• Uneven pad wear causing vibration or pulling during braking
• Delayed pad replacement alerts without wear sensors
• Brake dust accumulation affecting wheel appearance and performance

Installation Notes and Tips

When installing the DuraGo BP929C brake pads, ensure the mechanical wear sensor is properly connected to maintain accurate wear monitoring. Although mounting hardware is not included, use the existing hardware if in good condition or replace as necessary. The included pad shims should be installed to reduce noise and ensure proper pad alignment. Always follow vehicle-specific service manual instructions for brake pad replacement and torque specifications.

Quality Assurance and Warranty

DuraGo brake pads are manufactured to meet industry standards for safety and performance. The BP929C set uses bonded ceramic friction material and iron backing plates designed for durability and consistent braking. While specific warranty details are not provided, DuraGo products typically come with a limited warranty against defects in materials and workmanship. For detailed warranty information, refer to the product packaging or manufacturer documentation.