DuraGo BR31029 Disc Brake Rotor - Front

Brand DuraGo BR31029
Position Front
ABS Tone Ring Included No
Center Hole Diameter 2.4
Center Hole Diameter 61
Construction Full Cast
Conventional Or Drum-In-Hat Type Rotor Conventional
Cross Drilled No
Directional or Non-Directional Brake Surface Non-Directional
Discard Thickness 0.75
Discard Thickness 19
Material Cast Iron
Mounting Bolt Hole Circle Diameter 3.94
Mounting Bolt Hole Circle Diameter 100
Mounting Bolt Hole Diameter 0.5
Mounting Bolt Hole Diameter 12.8
Mounting Bolt Hole Quantity 4
Nominal Thickness 0.83
Nominal Thickness 21
Outside Diameter 9.45
Outside Diameter 240
Overall Height 1.74
Overall Height 44.1
Rust Resistant Coating No
Slotted No
Solid Or Vented Type Rotor Vented
Fits Honda · 60 vehicles

Vented design. Helps move heat away for more consistent braking performance.

Cast iron construction. Provides the strength and durability expected in a brake rotor.

Conventional rotor. A straightforward replacement for standard brake setups.

Cross-references Monroe Shocks & Struts 31029, Parts Authority PRT1581 and Raybestos Brakes 96147 for the same application. See all 9.

$33.27Free shipping
In stock · usually ships same day before 1pm CST
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.

Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
Step 2 — Quantity
Disc Brake Rotors are typically replaced in pairs, axle by axle.
Order total $33.27
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.

DuraGo BR31029 Front Vented Brake Rotor

The DuraGo BR31029 is a front disc brake rotor built for select Honda compact applications, including Civic, Civic del Sol, and CRX models. It uses a full cast iron construction with a vented, non-directional brake surface for consistent braking performance and straightforward service replacement.

Key Features

  • Cast iron, full cast construction
  • Vented rotor design for front brake applications
  • Non-directional brake surface
  • Outside diameter: 240 mm / 9.45 in
  • Nominal thickness: 21 mm / 0.83 in
  • Discard thickness: 19 mm / 0.75 in
  • Center hole diameter: 61 mm / 2.4 in
  • 4-bolt mounting pattern with 100 mm bolt circle diameter
  • Conventional rotor design, not cross-drilled or slotted

Detailed Description

DuraGo BR31029 is a conventional front brake rotor engineered for vehicles that use a 240 mm vented rotor diameter. It is listed for 1990-2000 Honda Civic front, 1993-1997 Honda Civic del Sol front, and 1990-1991 Honda CRX front applications. For 1996-1997 Honda Civic front fitment, the listing specifies a 240 mm rotor diameter. This part cross-references Monroe Shocks & Struts 31029 for the same application.

DuraGo manufactures brake drums and rotors through ISO-certified factories, with attention to fit, form, and function. The BR31029 follows a full cast, non-directional surface design that supports even pad contact and service-friendly replacement on compatible Honda brake systems. If you are replacing a worn front rotor on a Honda Civic, Honda Civic del Sol, or Honda CRX, this rotor matches the listed OE-style dimensions and mounting pattern.

What It Helps Address

  • Brake pulsation caused by rotor wear or thickness variation
  • Reduced braking consistency from a worn front rotor
  • Rotor scoring or surface damage
  • Service replacement for a front vented rotor with the listed dimensions
  • Fitment replacement for Honda Civic, Civic del Sol, and CRX front brake systems

Installation Notes and Tips

Verify rotor diameter, center hole diameter, bolt circle, and minimum thickness before installation. This rotor is for front use only and is not cross-drilled or slotted. Confirm the vehicle’s brake setup matches the listed 240 mm front application before ordering. For best results, inspect pads, caliper condition, and hub surfaces during rotor replacement.

Quality Assurance

DuraGo brake rotors are produced in ISO-certified factories and built to meet fit, form, and function requirements for aftermarket service. The BR31029 is manufactured to support dependable replacement on the listed Honda applications.

This part fits 60 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelSubmodelBody TypeDrive TypeTransmissionPositionNotes
2000HondaCivicHatchbackFront
2000HondaCivicLXSedanFront
2000HondaCivicGXSedanFront
2000HondaCivicDXSedanFront
2000HondaCivicDXCoupeFront
2000HondaCivicHXCoupeFront
1999HondaCivicHatchbackFront
1999HondaCivicLXSedanFront
1999HondaCivicGXSedanFront
1999HondaCivicDXSedanFront
1999HondaCivicDXCoupeFront
1999HondaCivicValue PackageSedanFront
1999HondaCivicHXCoupeFront
1998HondaCivicHatchbackFront
1998HondaCivicLXSedanFront
1998HondaCivicGXSedanFront
1998HondaCivicDXSedanFront
1998HondaCivicDXCoupeFront
1998HondaCivicHXCoupeFront
1997HondaCivicHatchbackFront
1997HondaCivicLXSedanFront240 mm Rotor Diameter
1997HondaCivicLXSedanManualFront240 mm Rotor Diameter
1997HondaCivicDXSedanFront
1997HondaCivicDXCoupeFront
1997HondaCivicHXCoupeFront
1997HondaCivic del SolSFront
1997HondaCivic del SolSiFront
1996HondaCivicHatchbackFront
1996HondaCivicLXSedanFront240 mm Rotor Diameter
1996HondaCivicLXSedanManualFront240 mm Rotor Diameter
1996HondaCivicDXSedanFront
1996HondaCivicDXCoupeFront
1996HondaCivicHXCoupeFront
1996HondaCivic del SolSFront
1996HondaCivic del SolSiFront
1995HondaCivicSedanFront
1995HondaCivicHatchbackFront
1995HondaCivicDXCoupeFront
1995HondaCivic del SolSFront
1995HondaCivic del SolSiFront
1994HondaCivicSedanFront
1994HondaCivicHatchbackFront
1994HondaCivicDXCoupeFront
1994HondaCivic del SolSFront
1994HondaCivic del SolSiFront
1993HondaCivicSedanFront
1993HondaCivicHatchbackFront
1993HondaCivicDXCoupeFront
1993HondaCivic del SolFront
1992HondaCivicFront
1991HondaCivicWagonFWDFront
1991HondaCivicHatchbackFront
1991HondaCivicLXSedanFront
1991HondaCivicDXSedanFront
1991HondaCRXBaseFront
1990HondaCivicWagonFWDFront
1990HondaCivicHatchbackFront
1990HondaCivicLXSedanFront
1990HondaCivicDXSedanFront
1990HondaCRXBaseFront
Directly replaces or cross-references 9 part numbers
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
Monroe Shocks & Struts — 31029Parts Authority — PRT1581Raybestos Brakes — 9614745251SR3A0012500612140023AX31029BD125006P96147