DuraGo BR31057-01 Disc Brake Rotor - Front

DuraGo BR31057-01 Front Brake Rotor

The DuraGo Titanium Series BR31057-01 is a front disc brake rotor built for Nissan Sentra, Nissan Altima, and INFINITI G20 applications that call for a 280 mm vented rotor. Its corrosion-resistant coating protects the hat and edge, while the titanium gray finish adds a clean look behind open wheel designs.

Manufactured in an ISO-certified factory, this rotor is engineered for fit, form, and function using DuraGo’s experience in brake components. If you are replacing a worn front rotor on a Nissan Sentra or Nissan Altima, BR31057-01 provides an OE-style replacement with rust protection and a non-directional brake surface.

Key Features

• Part number BR31057-01
• Front disc brake rotor for select Nissan and INFINITI vehicles
• Cast iron, full cast construction
• Vented rotor design for front brake applications
• Rust-resistant coating on the hat and edge
• Titanium gray finish for a cleaner appearance behind open wheels
• Non-directional brake surface
• Outside diameter: 11.02 in. / 280 mm
• Nominal thickness: 0.87 in. / 22 mm
• Discard thickness: 0.79 in. / 20 mm
• 4-bolt mounting pattern with 114.3 mm bolt circle

Detailed Description

DuraGo BR31057-01 is a conventional front brake rotor with a vented design, cast iron material, and a corrosion-resistant coating for added protection at the hat and edge. It measures 11.02 inches in outside diameter, 1.94 inches in overall height, and uses a 4-bolt pattern with a 114.3 mm bolt circle and 68.07 mm center hole diameter. This rotor is a direct-fit choice for 1993-2001 Nissan Altima front brake service, 1999-2002 INFINITI G20 front brake replacement, and select Nissan Sentra front applications including 2000-2002 and 2004-2006 models, plus the 2003 Sentra with a 280 mm rotor diameter requirement.

This part cross-references 402062F501 and 402067J101 for the same application.

Common Problems This Rotor Can Address

• Brake pulsation caused by rotor wear or thickness variation
• Rust buildup on the rotor hat and outer edge
• Reduced braking performance from a worn front rotor
• Noise or vibration during braking from an uneven braking surface
• Replacement needs during front brake service on Nissan Sentra, Nissan Altima, or INFINITI G20

Installation Notes and Tips

Verify rotor diameter, center bore, bolt pattern, and thickness before installation. This rotor is for front position use only and does not include an ABS tone ring. Clean the hub mounting surface thoroughly before installing the rotor to help reduce runout and brake noise. Always inspect pads, calipers, and hardware condition during brake service, and confirm the vehicle’s original rotor specification matches the 280 mm vented design.

Quality Assurance

DuraGo manufactures the Titanium Series rotor in an ISO-certified factory and builds it to meet fit, form, and function requirements. The corrosion-resistant coating is applied to help protect the hat and edge from rust, supporting long-term appearance and service life on Nissan Sentra, Nissan Altima, and INFINITI G20 front brake applications.