/live/media/PR/PR_BR3107501_Fro.jpg)
DuraGo BR31075-01 Disc Brake Rotor - Rear
| Brand | DuraGo BR31075-01 |
|---|---|
| Position | Rear |
| Material | Cast iron |
| Discard Thickness | 0.35 |
| Discard Thickness | 9 |
| Nominal Thickness | 0.39 |
| Nominal Thickness | 10 |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 2.55 |
| Overall Height | 64.7 |
| Outside Diameter | 10.59 |
| Outside Diameter | 269 |
| Mounting Bolt Hole Quantity | 5 |
| ABS Tone Ring Included | No |
| Solid Or Vented Type Rotor | Solid |
| Center Hole Diameter | 2.44 |
| Center Hole Diameter | 62 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Diameter | 0.57 |
| Mounting Bolt Hole Diameter | 14.5 |
| Directional or Non-Directional Brake Surface | Non-directional |
| Conventional Or Drum-In-Hat Type Rotor | Drum-in-hat |
| Cross Drilled | No |
| Slotted | No |
| Fits | Lexus and Toyota · 20 vehicles |
Corrosion-resistant coating. Helps protect the hat and edge for lasting defense against rust.
Full cast construction. Cast iron rotor built for dependable braking performance.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references 4243106020, 4243133010 and 4243133040 for the same application. See all 5.
DuraGo BR31075-01 Rear Brake Rotor
The DuraGo Titanium Series BR31075-01 is a rear disc brake rotor built for select Toyota and Lexus applications. It combines cast iron construction with a corrosion-resistant coating on the hat and edge to help maintain a cleaner appearance and added protection in exposed wheel areas.
Designed for rear brake service on 1992-2001 Toyota Camry, 1997-2001 Lexus ES300, and 1999-2003 Toyota Solara, this rotor is manufactured in an ISO-certified facility to support fit, form, and function requirements.
Key Features
- Part number BR31075-01
- Cast iron, full cast construction
- Rust-resistant coating on the hat and edge
- Titanium gray finish for open-wheel visibility
- Solid, non-directional brake surface
- Drum-in-hat rotor design for rear brake applications
- 5-bolt mounting pattern with 114.3 mm bolt circle
- Outside diameter: 269 mm (10.59 in)
- Nominal thickness: 10 mm (0.39 in)
- Discard thickness: 9 mm (0.35 in)
Detailed Description
DuraGo BR31075-01 is a rear drum-in-hat disc brake rotor engineered for vehicles that use a solid rear rotor design. The cast iron construction provides the structural base needed for consistent braking performance, while the corrosion-resistant coating helps protect the hat and edge from rust. The non-directional surface supports straightforward brake service and everyday use. This rotor is a direct-fit option for rear brake replacement on Toyota Camry, Lexus ES300, and Toyota Solara applications listed below.
This part cross-references Toyota OE numbers 4243106020 and 4243133010 for the same application.
Vehicle Fitment
- Fits 1992-2001 Toyota Camry, Rear — Coated Hat and Edge for Rust Resistance
- Fits 1997-2001 Lexus ES300, Rear — Coated Hat and Edge for Rust Resistance
- Fits 1999-2003 Toyota Solara, Rear — Coated Hat and Edge for Rust Resistance
What This Rotor Helps Address
- Rear brake pulsation caused by worn rotor surfaces
- Brake noise related to uneven or corroded rotor faces
- Reduced braking consistency from rotor wear beyond discard thickness
- Rust buildup on exposed rotor hat and edge areas
- Service replacement needs for drum-in-hat rear brake systems
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and rear drum-in-hat configuration before installation. Inspect pads, caliper hardware, and hub condition during brake service to help ensure proper rotor seating and even wear. Clean the hub mounting surface before installing the rotor to reduce runout concerns.
Quality Assurance
DuraGo manufactures the Titanium Series rotor in an ISO-certified factory and builds it to meet fit, form, and function requirements. The BR31075-01 is engineered from DuraGo’s two decades of brake component experience for use in select Toyota and Lexus rear brake applications.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2003 | Toyota | Solara | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2002 | Toyota | Solara | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2001 | Lexus | ES300 | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2001 | Toyota | Camry | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2001 | Toyota | Solara | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2000 | Lexus | ES300 | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2000 | Toyota | Camry | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 2000 | Toyota | Solara | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 1999 | Lexus | ES300 | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 1999 | Toyota | Camry | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 1999 | Toyota | Solara | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 1998 | Lexus | ES300 | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 1998 | Toyota | Camry | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 1997 | Lexus | ES300 | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 1997 | Toyota | Camry | — | — | Rear | Coated Hat and Edge for Rust Resistance |
| 1996 | Toyota | Camry | 2.2L | L4 | Rear | Coated Hat and Edge for Rust Resistance |
| 1995 | Toyota | Camry | 2.2L | L4 | Rear | Coated Hat and Edge for Rust Resistance |
| 1994 | Toyota | Camry | 2.2L | L4 | Rear | Coated Hat and Edge for Rust Resistance |
| 1993 | Toyota | Camry | 2.2L | L4 | Rear | Coated Hat and Edge for Rust Resistance |
| 1992 | Toyota | Camry | 2.2L | L4 | Rear | Coated Hat and Edge for Rust Resistance |
| No rows match your filter. | ||||||