/live/media/PR/PR_BR3120_Fro.jpg)
DuraGo BR3120 Disc Brake Rotor - Front
| Brand | DuraGo BR3120 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Bolt Size | M10 x 1.25 |
| Center Hole Diameter | 3.31 |
| Center Hole Diameter | 84.1 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.83 |
| Discard Thickness | 21 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.33 |
| Mounting Bolt Hole Circle Diameter | 110 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.87 |
| Nominal Thickness | 22 |
| Outside Diameter | 9.76 |
| Outside Diameter | 247.9 |
| Overall Height | 1.81 |
| Overall Height | 46 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Toyota · 12 vehicles |
OE-style fit. Manufactured to meet fit, form, and function requirements.
Vented design. Helps promote airflow for more consistent braking performance.
Full cast iron. Built with a conventional, non-directional brake surface.
Cross-references Anchor 3120, FEL-PRO 60759 and Parts Authority PRT1292 for the same application. See all 9.
DuraGo BR3120 Front Brake Rotor
The DuraGo BR3120 is a front disc brake rotor built for specific Toyota Pickup applications. It uses full cast iron construction and a vented design to support consistent braking performance on the front axle.
Key Features
- Cast iron rotor with full cast construction
- Vented rotor design for front brake use
- Outside diameter: 247.9 mm (9.76 in.)
- Nominal thickness: 22 mm (0.87 in.)
- Discard thickness: 21 mm (0.83 in.)
- Center hole diameter: 84.1 mm (3.31 in.)
- 5-bolt pattern with 110 mm (4.33 in.) bolt circle
- Non-directional brake surface
- No cross-drilling, no slots, and no ABS tone ring
Detailed Description
DuraGo BR3120 is a conventional front brake rotor for Toyota Pickup models that require a 248 mm front rotor. It is engineered in ISO-certified factories and reflects DuraGo’s long-running aftermarket brake program focused on fit, form, and function. This rotor is a direct-fit option for 1991-1995 Toyota Pickup front applications with calipers cast 17s and 248mm front rotors, as well as earlier Toyota Pickup front configurations listed below.
This part cross-references Anchor 3120 and FEL-PRO 60759 for the same application. The BR3120 part number is also used in related aftermarket listings for this front Toyota Pickup rotor application.
Vehicle Fitment
- Fits 1991-1995 Toyota Pickup, front — Calipers Cast 17s; 248mm Front Rotors
- Fits 1989-1990 Toyota Pickup, front — Std
- Fits 1986-1988 Toyota Pickup, front — 1/2 Ton, Except Heavy Duty
- Fits 1984 Toyota Pickup, front — 1/2 Ton, Except Heavy Duty
- Fits 1986 Toyota Pickup, front — 1/2 Ton Brake Drum
Common Repair Uses
- Front brake pulsation caused by rotor wear or thickness variation
- Brake noise related to worn or heat-affected front rotors
- Reduced braking consistency from a damaged or out-of-spec rotor
- Service replacement for Toyota Pickup front brake maintenance
- Restoration of proper rotor thickness and braking surface condition
Installation Notes and Tips
Verify rotor diameter, center bore, bolt pattern, and front brake configuration before installation. The BR3120 is a vented, non-directional rotor, so either side can be installed without directional orientation. Inspect pads, calipers, and hub surfaces during service to help ensure even contact and proper brake operation. Confirm the vehicle uses the listed 248 mm front rotor setup before ordering.
Quality Assurance
DuraGo manufactures brake rotors through ISO-certified factories and builds its brake drum and rotor program around catalog accuracy and application-specific fitment. The BR3120 is produced to meet fit, form, and function requirements for the listed Toyota Pickup front brake applications.
| Year | Make | Model | Submodel | Drive Type | Position | Notes |
|---|---|---|---|---|---|---|
| 1995 | Toyota | Pickup | — | RWD | Front | Calipers Cast 17s; 248mm Front Rotors |
| 1994 | Toyota | Pickup | — | RWD | Front | Calipers Cast 17s; 248mm Front Rotors |
| 1993 | Toyota | Pickup | — | RWD | Front | Calipers Cast 17s; 248mm Front Rotors |
| 1992 | Toyota | Pickup | — | RWD | Front | Calipers Cast 17s; 248mm Front Rotors |
| 1991 | Toyota | Pickup | — | RWD | Front | Calipers Cast 17s; 248mm Front Rotors |
| 1990 | Toyota | Pickup | — | RWD | Front | Std |
| 1989 | Toyota | Pickup | — | RWD | Front | Std |
| 1988 | Toyota | Pickup | — | RWD | Front | 1/2 Ton, Except Heavy Duty |
| 1987 | Toyota | Pickup | — | RWD | Front | 1/2 Ton, Except Heavy Duty |
| 1986 | Toyota | Pickup | — | RWD | Front | 1/2 Ton, Except Heavy Duty |
| 1986 | Toyota | Pickup | Base | RWD | Front | 1/2 Ton Brake Drum |
| 1984 | Toyota | Pickup | — | RWD | Front | 1/2 Ton, Except Heavy Duty |
| No rows match your filter. | ||||||