/live/media/PR/PR_BR31410_Fro.jpg)
DuraGo BR31410 Disc Brake Rotor - Rear
| Brand | DuraGo BR31410 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.68 |
| Center Hole Diameter | 68 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.63 |
| Discard Thickness | 16 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Diameter | 0.5 |
| Mounting Bolt Hole Diameter | 12.7 |
| Mounting Bolt Hole Quantity | 6 |
| Nominal Thickness | 0.71 |
| Nominal Thickness | 18 |
| Outside Diameter | 11.25 |
| Outside Diameter | 285.7 |
| Overall Height | 2.43 |
| Overall Height | 61.8 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Nissan and Suzuki · 36 vehicles |
Cast iron construction. Full-cast design for dependable braking performance.
Vented rotor design. Helps dissipate heat for more consistent stopping.
Non-directional surface. Simplifies installation and everyday service.
Cross-references Gates 31410, Parts Authority PRT5716 and Raybestos Brakes 980368 for the same application. See all 9.
DuraGo BR31410 Rear Brake Rotor
The DuraGo BR31410 is a rear disc brake rotor built for specific Nissan Frontier, Nissan Xterra, and Suzuki Equator applications. It uses a full cast, vented construction in cast iron to match the fit, form, and function expected in direct replacement brake service.
With a 285.7 mm outside diameter, 68 mm center hole diameter, and 114.3 mm bolt circle, this rotor is specified for rear brake repair on 2005-2026 Nissan Frontier, 2005-2015 Nissan Xterra, and 2009-2012 Suzuki Equator models.
Key Features
- Part number BR31410 rear disc brake rotor
- Cast iron, full cast construction
- Vented rotor design for rear brake applications
- Non-directional brake surface
- Outside diameter: 11.25 in. / 285.7 mm
- Nominal thickness: 0.71 in. / 18 mm
- Discard thickness: 0.63 in. / 16 mm
- 6-bolt mounting pattern with 114.3 mm bolt circle
- Center hole diameter: 2.68 in. / 68 mm
- No cross-drilling, no slots, and no ABS tone ring included
Detailed Description
DuraGo manufactures the BR31410 in ISO-certified factories with attention to fitment and dimensional accuracy for direct brake service. This rear rotor is engineered for vehicles that use a drum-in-hat style rotor design, making it a practical replacement for Nissan Frontier rear brake rotor service, Nissan Xterra rear brake rotor replacement, and Suzuki Equator rear brake maintenance. This part cross-references Raybestos Brakes 980368 and Gates 31410 for the same application.
The rotor’s cast iron construction and vented design support consistent braking performance under everyday driving conditions. Its non-directional surface helps simplify service by allowing installation without directional orientation concerns, while the standard dimensions help maintain proper wheel and brake assembly fitment.
Common Repair Uses
- Rear brake rotor replacement for worn or below-spec rotors
- Correction of brake pulsation caused by rotor wear or thickness variation
- Service for scoring, heat checking, or surface damage on the braking face
- Restoration of proper rear brake contact on Nissan Frontier and Nissan Xterra models
- Replacement for Suzuki Equator rear brake rotor wear
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub fitment before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake noise or pedal pulsation. Inspect pads, calipers, and hardware condition during rotor replacement, and confirm the rotor seats fully on the hub before reassembly. This rotor is listed for rear position applications only.
Quality Assurance
DuraGo states that its brake drum and rotor program is built for professional use and manufactured by ISO-certified factories to meet fit, form, and function requirements. The BR31410 is part of that brake rotor lineup and is produced to support direct replacement service on the listed Nissan Frontier, Nissan Xterra, and Suzuki Equator applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2025 | Nissan | Frontier | Rear | — |
| 2024 | Nissan | Frontier | Rear | — |
| 2023 | Nissan | Frontier | Rear | — |
| 2022 | Nissan | Frontier | Rear | — |
| 2021 | Nissan | Frontier | Rear | — |
| 2020 | Nissan | Frontier | Rear | — |
| 2019 | Nissan | Frontier | Rear | — |
| 2018 | Nissan | Frontier | Rear | — |
| 2017 | Nissan | Frontier | Rear | — |
| 2016 | Nissan | Frontier | Rear | — |
| 2015 | Nissan | Frontier | Rear | — |
| 2015 | Nissan | Xterra | Rear | — |
| 2014 | Nissan | Frontier | Rear | — |
| 2014 | Nissan | Xterra | Rear | — |
| 2013 | Nissan | Frontier | Rear | — |
| 2013 | Nissan | Xterra | Rear | — |
| 2012 | Nissan | Frontier | Rear | — |
| 2012 | Nissan | Xterra | Rear | — |
| 2012 | Suzuki | Equator | Rear | — |
| 2011 | Nissan | Frontier | Rear | — |
| 2011 | Nissan | Xterra | Rear | — |
| 2011 | Suzuki | Equator | Rear | — |
| 2010 | Nissan | Frontier | Rear | — |
| 2010 | Nissan | Xterra | Rear | — |
| 2010 | Suzuki | Equator | Rear | — |
| 2009 | Nissan | Frontier | Rear | — |
| 2009 | Nissan | Xterra | Rear | — |
| 2009 | Suzuki | Equator | Rear | — |
| 2008 | Nissan | Frontier | Rear | — |
| 2008 | Nissan | Xterra | Rear | — |
| 2007 | Nissan | Frontier | Rear | — |
| 2007 | Nissan | Xterra | Rear | — |
| 2006 | Nissan | Frontier | Rear | — |
| 2006 | Nissan | Xterra | Rear | — |
| 2005 | Nissan | Frontier | Rear | — |
| 2005 | Nissan | Xterra | Rear | — |
| No rows match your filter. | ||||