/live/media/PR/PR_BR3237_Fro.jpg)
DuraGo BR3237 Disc Brake Rotor - Front
| Brand | DuraGo BR3237 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 3.94 |
| Center Hole Diameter | 100.1 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.75 |
| Discard Thickness | 19 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 5.5 |
| Mounting Bolt Hole Circle Diameter | 139.7 |
| Mounting Bolt Hole Diameter | 0.59 |
| Mounting Bolt Hole Diameter | 15.04 |
| Mounting Bolt Hole Quantity | 6 |
| Nominal Thickness | 0.79 |
| Nominal Thickness | 20 |
| Outside Diameter | 11.89 |
| Outside Diameter | 302 |
| Overall Height | 1.89 |
| Overall Height | 48 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Toyota · 9 vehicles |
Vented design. Helps promote consistent airflow and braking performance.
Full cast construction. Cast iron rotor built for dependable strength and durability.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references Anchor 3237, Anchor 9838 and Parts Authority PRT1510 for the same application. See all 11.
DuraGo BR3237 Front Brake Rotor
The DuraGo BR3237 is a front disc brake rotor for select 1981-1989 Toyota Land Cruiser applications. Built from cast iron with a full cast construction, it is a conventional vented rotor with a non-directional brake surface for straightforward service and consistent pad contact.
Key Features
- Fits 1981-1989 Toyota Land Cruiser, front
- Part number BR3237
- Cast iron construction with full cast design
- Vented, conventional rotor layout
- Non-directional brake surface
- Outside diameter: 11.89 in. (302 mm)
- Nominal thickness: 0.79 in. (20 mm)
- Discard thickness: 0.75 in. (19 mm)
- 6-bolt mounting pattern with 5.5 in. (139.7 mm) bolt circle
- Center hole diameter: 3.94 in. (100.1 mm)
Product Details
DuraGo manufactures aftermarket brake components through ISO-certified factories with attention to fit, form, and function. The BR3237 front brake rotor follows that approach with a conventional vented design for the Toyota Land Cruiser front axle. Its cast iron construction and non-directional surface support even pad bedding and service-friendly replacement work. This rotor cross-references Anchor 3237 and 9838 for the same application.
Common Brake Issues It Can Address
- Front brake pulsation from rotor wear or thickness variation
- Brake noise caused by worn or uneven rotor surfaces
- Reduced braking performance from a rotor below discard thickness
- Service replacement for a damaged or heat-affected front rotor
- Restoration of proper brake pad contact on Toyota Land Cruiser front brakes
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake pulsation. Inspect pads, calipers, and hardware condition during service, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Fits 1981-1989 Toyota Land Cruiser, front.
Quality Assurance
DuraGo brake rotors are produced by ISO-certified factories and built to meet fit, form, and function requirements for aftermarket brake service. The BR3237 is engineered as a direct replacement rotor for the specified Toyota Land Cruiser front application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1989 | Toyota | Land Cruiser | Front | — |
| 1988 | Toyota | Land Cruiser | Front | — |
| 1987 | Toyota | Land Cruiser | Front | — |
| 1986 | Toyota | Land Cruiser | Front | — |
| 1985 | Toyota | Land Cruiser | Front | — |
| 1984 | Toyota | Land Cruiser | Front | — |
| 1983 | Toyota | Land Cruiser | Front | — |
| 1982 | Toyota | Land Cruiser | Front | — |
| 1981 | Toyota | Land Cruiser | Front | — |
| No rows match your filter. | ||||