/live/media/PR/PR_BR34220_Fro.jpg)
DuraGo BR34220 Disc Brake Rotor - Rear
| Brand | DuraGo BR34220 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.95 |
| Center Hole Diameter | 75 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.69 |
| Discard Thickness | 17.4 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.72 |
| Mounting Bolt Hole Circle Diameter | 120 |
| Mounting Bolt Hole Diameter | 0.57 |
| Mounting Bolt Hole Diameter | 14.6 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.75 |
| Nominal Thickness | 19 |
| Outside Diameter | 11.57 |
| Outside Diameter | 294 |
| Overall Height | 2.35 |
| Overall Height | 59.7 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | BMW · 22 vehicles |
Vented design. Helps dissipate heat for more consistent braking performance.
Cast iron construction. Full-cast rotor for dependable strength and durability.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references Parts Authority PRT5417, Raybestos Brakes 980127 and 34220 for the same application. See all 9.
DuraGo BR34220 Rear Brake Rotor
The DuraGo BR34220 is a rear disc brake rotor built for select BMW applications that require a vented, drum-in-hat style rotor. Made from cast iron with a full cast construction, it supports consistent braking performance for BMW 323i, 325Ci, 325i, 328Ci, 328i, and 328is rear brake service.
With a non-directional brake surface and OE-style dimensions, this rotor is a direct-fit replacement for drivers servicing rear brake systems on 1996-2006 BMW 3 Series models. The BR34220 part number is also referenced in aftermarket catalogs for the same application.
Key Features
- Part number: BR34220
- Rear disc brake rotor for select BMW 3 Series models
- Cast iron, full cast construction
- Vented, drum-in-hat type rotor
- Outside diameter: 11.57 in. / 294 mm
- Nominal thickness: 0.75 in. / 19 mm
- Discard thickness: 0.69 in. / 17.4 mm
- Center hole diameter: 2.95 in. / 75 mm
- 5-bolt mounting pattern with 120 mm bolt circle
- Non-directional brake surface
- No cross-drilling or slots
Product Details
DuraGo has over 45 years of aftermarket manufacturing experience, and its brake drum and rotor program is built around catalog accuracy and fit, form, and function requirements. The BR34220 rear rotor uses a vented design and drum-in-hat configuration for the rear brake setup found on select BMW 325Ci, 325i, 323i, 328Ci, 328i, and 328is models. This rotor measures 2.35 in. overall height and uses a 5-lug, 120 mm bolt circle layout for proper alignment in the rear brake assembly.
This part cross-references Raybestos Brakes 980127 for the same application.
Common Brake Issues This Rotor Can Address
- Rear brake pulsation from worn rotor surfaces
- Brake noise caused by uneven rotor wear
- Reduced braking consistency from rotor thickness loss
- Service replacement for rusted or heat-cycled rear rotors
- Fitment replacement for BMW rear brake maintenance
Installation Notes
Verify rotor dimensions, hub fitment, and rear brake configuration before installation. This rotor is non-directional and does not use cross-drilled or slotted surface machining. Confirm the vehicle uses the listed rear application and vented rear rotor setup, especially on 1996-1999 BMW 328is and 1996-1998 BMW 328i models noted with vented rear rotors.
Compatible With 2001-2006 BMW 325Ci, rear; 2001-2005 BMW 325i, rear; 2000 BMW 323i, rear; 2000 BMW 328Ci, rear; 1999-2000 BMW 328i, rear; 1996-1999 BMW 328is, rear; and 1996-1998 BMW 328i, rear.
Quality Assurance
DuraGo manufactures brake components through ISO-certified factories to meet fit, form, and function requirements. The BR34220 is produced to support consistent aftermarket replacement quality for BMW rear brake service.
| Year | Make | Model | Body Type | Position | Notes |
|---|---|---|---|---|---|
| 2006 | BMW | 325Ci | — | Rear | — |
| 2005 | BMW | 325Ci | — | Rear | — |
| 2005 | BMW | 325i | — | Rear | — |
| 2004 | BMW | 325Ci | — | Rear | — |
| 2004 | BMW | 325i | — | Rear | — |
| 2003 | BMW | 325Ci | — | Rear | — |
| 2003 | BMW | 325i | — | Rear | — |
| 2002 | BMW | 325Ci | — | Rear | — |
| 2002 | BMW | 325i | — | Rear | — |
| 2001 | BMW | 325Ci | — | Rear | — |
| 2001 | BMW | 325i | — | Rear | — |
| 2000 | BMW | 323i | Wagon | Rear | — |
| 2000 | BMW | 328Ci | — | Rear | — |
| 2000 | BMW | 328i | — | Rear | — |
| 1999 | BMW | 328i | — | Rear | — |
| 1999 | BMW | 328is | — | Rear | Vented Rear Rotors |
| 1998 | BMW | 328i | — | Rear | Vented Rear Rotors |
| 1998 | BMW | 328is | — | Rear | Vented Rear Rotors |
| 1997 | BMW | 328i | — | Rear | Vented Rear Rotors |
| 1997 | BMW | 328is | — | Rear | Vented Rear Rotors |
| 1996 | BMW | 328i | — | Rear | Vented Rear Rotors |
| 1996 | BMW | 328is | — | Rear | Vented Rear Rotors |
| No rows match your filter. | |||||