/live/media/PR/PR_BR5115_Fro.jpg)
DuraGo BR5115 Disc Brake Rotor - Front
| Brand | DuraGo BR5115 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.83 |
| Center Hole Diameter | 72 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.88 |
| Discard Thickness | 22.4 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Diameter | 0.61 |
| Mounting Bolt Hole Diameter | 15.5 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.95 |
| Nominal Thickness | 24.1 |
| Outside Diameter | 11.02 |
| Outside Diameter | 280 |
| Overall Height | 3.23 |
| Overall Height | 82 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Jeep · 32 vehicles |
Cast iron construction. Full cast rotor for dependable braking performance.
Vented design. Helps dissipate heat for more consistent stopping.
Professional-grade quality. Manufactured in ISO certified factories to meet fit, form, and function requirements.
Cross-references Carlson 7142, Karlyn 5115 and Raybestos Brakes 780444 for the same application. See all 14.
DuraGo BR5115 Front Brake Rotor
The DuraGo BR5115 is a front disc brake rotor built for Jeep applications that call for a vented, conventional full-cast design. It uses cast iron construction and a non-directional brake surface to support consistent pad contact on the front axle.
Key Features
- Part number BR5115 front disc brake rotor
- Cast iron, full cast construction
- Vented rotor design for front brake use
- Non-directional brake surface
- Conventional, drum-in-hat style not used
- 5-bolt mounting pattern with 114.3 mm bolt circle
- Outside diameter: 280 mm (11.02 in.)
- Nominal thickness: 24.1 mm (0.95 in.)
- Discard thickness: 22.4 mm (0.88 in.)
- Overall height: 82 mm (3.23 in.)
- Center hole diameter: 72 mm (2.83 in.)
- No cross-drilling, no slots, no ABS tone ring
Detailed Description
DuraGo BR5115 is engineered as a direct-fit front brake rotor for select Jeep Cherokee, Grand Cherokee, TJ, Wrangler, Comanche, and Wagoneer models. It is a vented rotor with a 5-lug, 114.3 mm bolt circle and 82 mm overall height, making it a fitment-specific replacement for vehicles that require this exact rotor profile. The cast iron, full cast construction supports stable braking performance, while the non-directional surface simplifies pad bedding and service replacement. DuraGo manufactures its brake drum and rotor program in ISO-certified factories with attention to fit, form, and function. This part cross-references Carlson 7142 for the same application.
Vehicle Fitment
- Fits 1999 Jeep Cherokee, front. 82 mm overall height.
- Fits 1999 Jeep TJ, front. 82 mm overall height.
- Fits 1999 Jeep Wrangler, front. 82 mm overall height.
- Fits 1990-1998 Jeep Cherokee, front.
- Fits 1993-1998 Jeep Grand Cherokee, front.
- Fits 1997-1998 Jeep TJ, front.
- Fits 1997-1998 Jeep Wrangler, front.
- Fits 1990-1995 Jeep Wrangler, front.
- Fits 1990-1992 Jeep Comanche, front.
- Fits 1990 Jeep Wagoneer, front.
Common Repair Uses
- Front brake rotor replacement for Jeep Cherokee brake service
- Restoring braking smoothness on Jeep Wrangler front brakes
- Replacing a worn or below-spec rotor on Jeep TJ front axle applications
- Addressing brake pulsation caused by rotor wear or thickness loss
- Correcting uneven pad contact on vented front brake systems
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and overall height before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake pulsation. Inspect pads, calipers, and wheel bearings during service, and confirm the rotor meets the vehicle’s required discard thickness before reuse or replacement.
Quality Assurance
DuraGo has over 45 years of aftermarket manufacturing experience, and its brake rotor program is produced in ISO-certified factories to meet fit, form, and function requirements. BR5115 is built to the listed dimensional specifications for the confirmed Jeep front brake applications.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1999 | Jeep | Cherokee | — | Front | 82 mm Overall Height |
| 1999 | Jeep | TJ | — | Front | 82 mm Overall Height |
| 1999 | Jeep | Wrangler | — | Front | 82 mm Overall Height |
| 1998 | Jeep | Cherokee | — | Front | — |
| 1998 | Jeep | Grand Cherokee | — | Front | — |
| 1998 | Jeep | TJ | — | Front | — |
| 1998 | Jeep | Wrangler | — | Front | — |
| 1997 | Jeep | Cherokee | — | Front | — |
| 1997 | Jeep | Grand Cherokee | — | Front | — |
| 1997 | Jeep | TJ | — | Front | — |
| 1997 | Jeep | Wrangler | — | Front | — |
| 1996 | Jeep | Cherokee | — | Front | — |
| 1996 | Jeep | Grand Cherokee | — | Front | — |
| 1995 | Jeep | Cherokee | — | Front | — |
| 1995 | Jeep | Grand Cherokee | — | Front | — |
| 1995 | Jeep | Wrangler | — | Front | — |
| 1994 | Jeep | Cherokee | — | Front | — |
| 1994 | Jeep | Grand Cherokee | — | Front | — |
| 1994 | Jeep | Wrangler | — | Front | — |
| 1993 | Jeep | Cherokee | — | Front | — |
| 1993 | Jeep | Grand Cherokee | — | Front | — |
| 1993 | Jeep | Wrangler | — | Front | — |
| 1992 | Jeep | Cherokee | 4WD | Front | — |
| 1992 | Jeep | Comanche | 4WD | Front | — |
| 1992 | Jeep | Wrangler | — | Front | — |
| 1991 | Jeep | Cherokee | 4WD | Front | — |
| 1991 | Jeep | Comanche | 4WD | Front | — |
| 1991 | Jeep | Wrangler | — | Front | — |
| 1990 | Jeep | Cherokee | 4WD | Front | — |
| 1990 | Jeep | Comanche | 4WD | Front | — |
| 1990 | Jeep | Wagoneer | — | Front | — |
| 1990 | Jeep | Wrangler | — | Front | — |
| No rows match your filter. | |||||