/live/media/PR/PR_BR5119_Fro.jpg)
DuraGo BR5119 Disc Brake Rotor - Rear
| Brand | DuraGo BR5119 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.84 |
| Center Hole Diameter | 72.2 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.33 |
| Discard Thickness | 8.5 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 5 |
| Mounting Bolt Hole Circle Diameter | 127 |
| Mounting Bolt Hole Diameter | 0.61 |
| Mounting Bolt Hole Diameter | 15.6 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.39 |
| Nominal Thickness | 10 |
| Outside Diameter | 12.01 |
| Outside Diameter | 305 |
| Overall Height | 2.97 |
| Overall Height | 75.4 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Solid |
| Fits | Jeep · 6 vehicles |
OE-style fit. Manufactured to meet fit, form, and function requirements.
Full cast iron. Solid construction delivers dependable braking performance.
Non-directional surface. Helps simplify installation and brake pad bedding.
Cross-references Parts Authority PRT5253, Raybestos Brakes 76794 and 5119 for the same application. See all 9.
DuraGo BR5119 Rear Brake Rotor
The DuraGo BR5119 is a rear disc brake rotor for select Jeep Grand Cherokee applications. Built from cast iron with a full cast construction, it provides the dimensions and brake surface needed for a direct-fit rear brake service on 1999-2004 Jeep Grand Cherokee models.
Key Features
- Cast iron construction for dependable braking performance
- Full cast rotor design
- Solid, non-directional brake surface
- Drum-in-hat rotor configuration
- 5-bolt mounting pattern with 127 mm bolt circle
- Outside diameter: 12.01 in. (305 mm)
- Nominal thickness: 0.39 in. (10 mm)
- Discard thickness: 0.33 in. (8.5 mm)
- Center hole diameter: 2.84 in. (72.2 mm)
Detailed Description
DuraGo BR5119 is engineered as a rear brake rotor for 1999-2004 Jeep Grand Cherokee vehicles. The rotor uses cast iron and a full cast design to match the required fit, form, and function for this application. Its solid, non-directional braking surface supports consistent contact, while the drum-in-hat layout matches the rear brake setup used on these Jeep models. DuraGo manufactures brake drums and rotors in ISO-certified factories and focuses on catalog coverage and application accuracy for professional repair work. This part cross-references Raybestos Brakes 76794 for the same application.
Common Repair Uses
- Rear brake rotor replacement for worn or below-spec Jeep Grand Cherokee rotors
- Brake pulsation caused by rotor thickness variation
- Brake noise related to uneven rotor surfaces
- Reduced braking performance from heat-worn rear rotors
- Service replacement for a 1999-2004 Jeep Grand Cherokee rear brake job
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. Inspect rear pads, caliper hardware, and hub condition at the same time to help ensure even braking contact. Clean the mounting surfaces thoroughly so the rotor seats flat on the hub. Confirm this part number, BR5119, against the vehicle’s rear brake specification before final assembly.
Quality Assurance
DuraGo brake rotors are produced in ISO-certified factories and built to meet fit, form, and function requirements for the listed application. The BR5119 is part of DuraGo’s brake drum and rotor program, which is used by professional installers for cataloged replacement coverage.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Jeep | Grand Cherokee | Rear | — |
| 2003 | Jeep | Grand Cherokee | Rear | — |
| 2002 | Jeep | Grand Cherokee | Rear | — |
| 2001 | Jeep | Grand Cherokee | Rear | — |
| 2000 | Jeep | Grand Cherokee | Rear | — |
| 1999 | Jeep | Grand Cherokee | Rear | — |
| No rows match your filter. | ||||