/live/media/PR/PR_BR5357_Fro.jpg)
DuraGo BR5357 Disc Brake Rotor and Hub Assembly - Front
| Brand | DuraGo BR5357 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | Yes |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 1.21 |
| Discard Thickness | 30.86 |
| Inner Bearing Cup Included | Yes |
| Mounting Bolt Hole Circle Diameter | 5.5 |
| Mounting Bolt Hole Circle Diameter | 139.7 |
| Nominal Thickness | 1.29 |
| Nominal Thickness | 32.7 |
| Outer Bearing Cup Included | Yes |
| Overall Height | 4.51 |
| Overall Height | 114.5 |
| Rotor Outside Diameter | 11.61 |
| Rotor Outside Diameter | 295 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Stud Quantity | 5 |
| Stud Thread Size | 1/2-20 |
| Wheel Studs Included | Yes |
| Fits | Dodge · 6 vehicles |
OE-style replacement. Built to meet fit, form, and function requirements.
Vented rotor design. Helps promote airflow for more efficient braking performance.
ABS tone ring included. Adds integrated sensing support in one assembly.
Cross-references DENSO Auto Parts 5357, Parts Authority PRT1921 and 76446 for the same application. See all 8.
DuraGo BR5357 Front Rotor and Hub Assembly
The DuraGo BR5357 is a front disc brake rotor and hub assembly built for 1994-1999 Dodge Ram 1500 applications. It combines a vented rotor with an integrated hub design, ABS tone ring, and included bearing cups for a direct-service replacement on the front axle.
Key Features
- Fits 1994-1999 Dodge Ram 1500, front
- Part number BR5357 for brake service identification
- Vented rotor design for front brake applications
- 11.61 in. rotor outside diameter
- Nominal thickness: 1.29 in. / 32.7 mm
- Discard thickness: 1.21 in. / 30.86 mm
- 5-stud hub with 1/2-20 stud thread size
- 5.5 in. bolt circle diameter
- ABS tone ring included
- Inner and outer bearing cups included
- Wheel studs included
- Non-directional brake surface
Detailed Description
DuraGo BR5357 is engineered as a front rotor and hub assembly for Dodge Ram 1500 trucks from 1994 through 1999. The vented rotor construction supports front brake heat management, while the integrated hub layout helps streamline replacement on vehicles that use a hub-style rotor assembly. DuraGo manufactures its brake program through ISO-certified factories and focuses on fit, form, and function for aftermarket brake service. This part cross-references DENSO Auto Parts (e.g., 5357) for the same application.
What This Part Helps Address
- Front brake pulsation from rotor wear
- Brake noise related to uneven rotor surfaces
- ABS signal issues tied to a worn or missing tone ring
- Hub and bearing service needs during front brake repair
- Brake performance loss from rotor thickness approaching discard limits
Installation Notes and Tips
Confirm rotor diameter, bolt circle, stud count, and bearing cup configuration before installation. Clean the hub mounting surface thoroughly and inspect related bearings, seals, and brake components for wear before reassembly. Because this assembly includes an ABS tone ring, verify sensor alignment and system operation after installation. For fitment, this part is listed for 1994-1999 Dodge Ram 1500, front, and should be matched to the vehicle’s brake and hub specifications.
Quality Assurance
DuraGo brake components are produced in ISO-certified factories and are cataloged for professional brake service applications. The brand’s brake drum and rotor program is built around consistent application coverage and manufacturing control for fit, form, and function.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1999 | Dodge | Ram 1500 | RWD | Front | — |
| 1998 | Dodge | Ram 1500 | RWD | Front | — |
| 1997 | Dodge | Ram 1500 | RWD | Front | — |
| 1996 | Dodge | Ram 1500 | RWD | Front | — |
| 1995 | Dodge | Ram 1500 | RWD | Front | — |
| 1994 | Dodge | Ram 1500 | RWD | Front | — |
| No rows match your filter. | |||||