/live/media/PR/PR_BR5374_Fro.jpg)
DuraGo BR5374 Disc Brake Rotor and Hub Assembly - Front
| Brand | DuraGo BR5374 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | Yes |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 1.21 |
| Discard Thickness | 30.8 |
| Inner Bearing Cup Included | Yes |
| Mounting Bolt Hole Circle Diameter | 6.5 |
| Mounting Bolt Hole Circle Diameter | 165.1 |
| Nominal Thickness | 1.28 |
| Nominal Thickness | 32.6 |
| Outer Bearing Cup Included | Yes |
| Overall Height | 5.16 |
| Overall Height | 131 |
| Rotor Outside Diameter | 12.52 |
| Rotor Outside Diameter | 318 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Stud Quantity | 8 |
| Stud Thread Size | 9/16-18 |
| Wheel Studs Included | Yes |
| Fits | Dodge · 6 vehicles |
Vented rotor design. Promotes efficient airflow for more consistent braking performance.
ABS tone ring included. Supports accurate wheel speed signal detection.
Bearing cups included. Helps simplify rotor and hub assembly installation.
Cross-references Parts Authority PRT1923, Raybestos Brakes 76452 and 5374 for the same application. See all 9.
DuraGo BR5374 Front Brake Rotor and Hub
The DuraGo BR5374 is a front disc brake rotor and hub assembly built for 1994-1999 Dodge Ram 2500 applications. It combines rotor, hub, bearing cups, wheel studs, and an ABS tone ring in one service part for front-end brake maintenance on the Dodge Ram 2500.
Key Features
- Fits 1994-1999 Dodge Ram 2500, front
- Disc brake rotor and hub assembly for front axle service
- Vented rotor design for heat management
- Rotor outside diameter: 12.52 in. / 318 mm
- Nominal thickness: 1.28 in. / 32.6 mm
- Discard thickness: 1.21 in. / 30.8 mm
- 8-stud hub with 9/16-18 stud thread size
- ABS tone ring included
- Inner bearing cup included
- Outer bearing cup included
- Wheel studs included
- Non-directional brake surface
Detailed Description
DuraGo BR5374 is engineered as a front rotor and hub assembly for the Dodge Ram 2500, with fitment covering 1994 through 1999 models. The vented rotor design, 165.1 mm (6.5 in.) bolt circle, and 5.16 in. overall height support direct replacement service where the original front hub-and-rotor assembly is being serviced. DuraGo manufactures brake components through ISO-certified factories and focuses on fit, form, and function for aftermarket brake repair. This part cross-references Raybestos Brakes 76452 for the same application.
Common Reasons to Replace
- Front brake pulsation or rotor thickness variation
- Excessive rotor wear approaching discard thickness
- Hub or bearing cup service during front brake repair
- ABS tone ring damage or sensor-related front wheel speed issues
- Wheel stud wear or damage on the front hub assembly
Installation Notes and Tips
Verify rotor thickness, hub condition, and bearing cup fit before installation. Clean the mounting surfaces thoroughly and confirm the ABS tone ring and wheel stud pattern match the original front assembly on the Dodge Ram 2500. Always follow factory torque specifications and brake service procedures during installation.
Quality Assurance
DuraGo has more than 45 years of aftermarket manufacturing experience and supplies brake components through ISO-certified factories. The BR5374 is built to meet fit, form, and function requirements for front brake service on the Dodge Ram 2500.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1999 | Dodge | Ram 2500 | RWD | Front | — |
| 1998 | Dodge | Ram 2500 | RWD | Front | — |
| 1997 | Dodge | Ram 2500 | RWD | Front | — |
| 1996 | Dodge | Ram 2500 | RWD | Front | — |
| 1995 | Dodge | Ram 2500 | RWD | Front | — |
| 1994 | Dodge | Ram 2500 | RWD | Front | — |
| No rows match your filter. | |||||