/live/media/PR/PR_BR5396_Fro.jpg)
DuraGo BR5396 Disc Brake Rotor - Front
| Brand | DuraGo BR5396 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.83 |
| Center Hole Diameter | 72 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.89 |
| Discard Thickness | 22.7 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Diameter | 0.65 |
| Mounting Bolt Hole Diameter | 16.5 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.95 |
| Nominal Thickness | 24.2 |
| Outside Diameter | 11.02 |
| Outside Diameter | 280 |
| Overall Height | 3.07 |
| Overall Height | 78 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Jeep · 19 vehicles |
OE-style fit. Manufactured to meet fit, form, and function requirements.
Vented design. Helps promote airflow for more consistent braking performance.
Cast iron construction. Full-cast rotor built for dependable stopping power.
Cross-references Four Seasons 76923, Parts Authority PRT5276 and 5396 for the same application. See all 9.
DuraGo BR5396 Front Disc Brake Rotor
The DuraGo BR5396 is a front disc brake rotor built for Jeep applications that need a direct-fit replacement with consistent braking surface geometry. It uses full cast iron construction and a vented design to support heat dissipation during everyday driving and repeated stops.
Compatible with 1999-2006 Jeep Cherokee, TJ, and Wrangler front brake applications, this rotor is sized for vehicles that require a 280 mm outside diameter, 5-lug bolt pattern, and non-directional brake surface. The BR5396 is a practical choice for restoring rotor serviceability on Jeep Cherokee, Jeep TJ, and Jeep Wrangler front brake systems.
Key Features
- Part number BR5396 front disc brake rotor
- Cast iron, full cast construction
- Vented rotor design for front axle use
- Non-directional brake surface
- 5 mounting bolt holes with 114.3 mm bolt circle diameter
- 280 mm outside diameter and 72 mm center hole diameter
- Conventional rotor design, not cross-drilled or slotted
- Direct-fit dimensions for select Jeep Cherokee, TJ, and Wrangler models
Detailed Description
DuraGo manufactures the BR5396 as part of its brake drum and rotor program, using ISO-certified factory production to meet fit, form, and function requirements. This rotor is made from cast iron with a vented, conventional construction and a non-directional braking surface to support even pad contact and predictable service performance. The rotor measures 11.02 inches in outside diameter, 0.95 inches nominal thickness, and 0.89 inches discard thickness, with an overall height of 3.07 inches.
This part cross-references Four Seasons 76923 for the same application. For buyers searching for a front brake rotor for 2000-2006 Jeep Wrangler, 2000-2006 Jeep TJ, or 2000-2001 Jeep Cherokee, the BR5396 provides the dimensional match needed for proper front brake service. It also fits 1999 Jeep Cherokee, 1999 Jeep TJ, and 1999 Jeep Wrangler front applications with the listed 78 mm overall height note.
What It Helps Address
- Rotor wear that affects braking smoothness
- Brake pulsation caused by an out-of-spec front rotor
- Reduced pad contact from a worn braking surface
- Front brake service needs on Jeep Cherokee, TJ, and Wrangler models
- Replacement of a conventional vented rotor with matching dimensions
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and overall height before installation, especially on 1999 applications with the 78 mm overall height note. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and wheel bearings during service. Confirm front position fitment for your specific Jeep Cherokee, TJ, or Wrangler before ordering the BR5396.
Quality Assurance
DuraGo states that its brake rotor program is manufactured in ISO-certified factories and built to meet fit, form, and function requirements. The brand has more than 45 years of aftermarket manufacturing history, with a focus on catalog accuracy and application coverage.
- Fits 2000-2006 Jeep TJ, front
- Fits 2000-2006 Jeep Wrangler, front
- Fits 2000-2001 Jeep Cherokee, front
- Fits 1999 Jeep Cherokee, front, 78 mm overall height
- Fits 1999 Jeep TJ, front, 78 mm overall height
- Fits 1999 Jeep Wrangler, front, 78 mm overall height
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2006 | Jeep | TJ | Front | — |
| 2006 | Jeep | Wrangler | Front | — |
| 2005 | Jeep | TJ | Front | — |
| 2005 | Jeep | Wrangler | Front | — |
| 2004 | Jeep | TJ | Front | — |
| 2004 | Jeep | Wrangler | Front | — |
| 2003 | Jeep | TJ | Front | — |
| 2003 | Jeep | Wrangler | Front | — |
| 2002 | Jeep | TJ | Front | — |
| 2002 | Jeep | Wrangler | Front | — |
| 2001 | Jeep | Cherokee | Front | — |
| 2001 | Jeep | TJ | Front | — |
| 2001 | Jeep | Wrangler | Front | — |
| 2000 | Jeep | Cherokee | Front | — |
| 2000 | Jeep | TJ | Front | — |
| 2000 | Jeep | Wrangler | Front | — |
| 1999 | Jeep | Cherokee | Front | 78 mm Overall Height |
| 1999 | Jeep | TJ | Front | 78 mm Overall Height |
| 1999 | Jeep | Wrangler | Front | 78 mm Overall Height |
| No rows match your filter. | ||||