/live/media/PR/PR_BR54070_Fro.jpg)
DuraGo BR54070 Disc Brake Rotor - Front
| Brand | DuraGo BR54070 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.8 |
| Center Hole Diameter | 71 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.97 |
| Discard Thickness | 24.75 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.25 |
| Mounting Bolt Hole Circle Diameter | 107.95 |
| Mounting Bolt Hole Diameter | 0.56 |
| Mounting Bolt Hole Diameter | 14.3 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 1.02 |
| Nominal Thickness | 26 |
| Outside Diameter | 11.1 |
| Outside Diameter | 282 |
| Overall Height | 1.83 |
| Overall Height | 46.4 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Ford · 5 vehicles |
Vented design. Helps promote airflow for more consistent braking performance.
Full cast construction. Cast iron rotor built for dependable strength and durability.
ISO-certified manufacturing. Made to meet fit, form, and function requirements.
Cross-references Bosch 66833, Haynes 54070 and Parts Authority PRT5244 for the same application. See all 10.
DuraGo BR54070 Front Brake Rotor
The DuraGo BR54070 is a front disc brake rotor built for 1999-2003 Ford Windstar applications. Made from cast iron with a full cast, vented design, it provides the dimensions and brake surface style needed for a direct-fit replacement on the front axle.
Key Features
- Fits 1999-2003 Ford Windstar, front
- Part number BR54070 for easy identification
- Cast iron construction with full cast design
- Vented rotor with non-directional brake surface
- Outside diameter: 11.1 in. (282 mm)
- Nominal thickness: 1.02 in. (26 mm)
- Discard thickness: 0.97 in. (24.75 mm)
- 5-bolt mounting pattern with 4.25 in. bolt circle
Detailed Description
DuraGo BR54070 is engineered as a conventional front brake rotor for the Ford Windstar, covering 1999, 2000, 2001, 2002, and 2003 model years. Its vented construction helps manage heat during braking, while the non-directional surface supports consistent pad contact during service. The rotor uses a 5-hole mounting pattern, a 2.8 in. center hole diameter, and a 4.25 in. bolt circle to match the specified front brake application. DuraGo manufactures brake drums and rotors through ISO-certified factories, with a focus on fit, form, and function for aftermarket replacement needs. This part cross-references Bosch 66833 for the same application.
What It Helps Address
- Front brake pulsation caused by worn rotor surfaces
- Brake noise related to uneven rotor wear
- Reduced braking consistency from rotor thickness loss
- Heat buildup in front braking service
- Service replacement for a worn Ford Windstar front rotor
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation on the Ford Windstar front axle. Clean the hub mounting surface thoroughly to help prevent runout-related brake issues. Always inspect pads, calipers, and related hardware during brake service, and follow the vehicle manufacturer’s torque specifications and bedding procedure after installation.
Quality Assurance
DuraGo has more than 45 years of aftermarket manufacturing experience and produces brake components in ISO-certified factories. The BR54070 is built to meet fit, form, and function requirements for the listed Ford Windstar front brake application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2003 | Ford | Windstar | Front | — |
| 2002 | Ford | Windstar | Front | — |
| 2001 | Ford | Windstar | Front | — |
| 2000 | Ford | Windstar | Front | — |
| 1999 | Ford | Windstar | Front | — |
| No rows match your filter. | ||||