/live/media/PR/PR_BR54072_Fro.jpg)
DuraGo BR54072 Disc Brake Rotor and Hub Assembly - Front
| Brand | DuraGo BR54072 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 1.42 |
| Discard Thickness | 36 |
| Inner Bearing Cup Included | Yes |
| Mounting Bolt Hole Circle Diameter | 6.69 |
| Mounting Bolt Hole Circle Diameter | 170 |
| Nominal Thickness | 1.5 |
| Nominal Thickness | 38 |
| Outer Bearing Cup Included | Yes |
| Overall Height | 5.65 |
| Overall Height | 143.5 |
| Rotor Outside Diameter | 13.03 |
| Rotor Outside Diameter | 331 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Stud Quantity | 8 |
| Stud Thread Size | M14 x 2 |
| Wheel Studs Included | Yes |
| Fits | Ford · 7 vehicles |
OE-style fit. Manufactured to meet fit, form, and function requirements.
Vented rotor. Helps promote efficient airflow through the braking surface.
Bearing cups included. Ready for a more complete hub assembly installation.
Cross-references Four Seasons 66786, 2U2Z1V102CA and 54072 for the same application. See all 9.
DuraGo BR54072 Front Disc Brake Rotor and Hub Assembly
The DuraGo BR54072 is a front disc brake rotor and hub assembly built for specific Ford Super Duty applications. It combines rotor, hub, bearing cups, and wheel studs in one service part for direct replacement on the front axle.
- Front disc brake rotor and hub assembly
- Vented rotor design for front brake service
- Rotor outside diameter: 13.03 in. / 331 mm
- Nominal thickness: 1.5 in. / 38 mm
- Discard thickness: 1.42 in. / 36 mm
- 8-stud pattern with M14 x 2 stud thread size
- Mounting bolt hole circle diameter: 170 mm / 6.69 in.
- Overall height: 5.65 in. / 143.5 mm
- Inner bearing cup included
- Outer bearing cup included
- Wheel studs included
- Non-directional brake surface
Fitment and application details
Fits 1999-2002 Ford F-350 Super Duty, front, SRW; Twin I-Beam Axle. Fits 1999-2001 Ford F-250 Super Duty, front, Twin I-Beam Axle. If you are searching for a Ford F-350 Super Duty front rotor hub assembly or a Ford F-250 Super Duty front brake rotor replacement, BR54072 matches the listed applications.
This part cross-references Four Seasons 66786 for the same application.
What this part helps address
- Front brake pulsation caused by rotor wear or thickness variation
- Noise or vibration from a worn rotor and hub assembly
- Service issues related to damaged bearing cups
- Wheel stud replacement needs during front brake service
- Brake performance loss from a rotor that has reached discard thickness
Installation notes and tips
Verify axle configuration, hub dimensions, and stud pattern before installation. Clean the mounting surfaces thoroughly and inspect the bearings, seals, and related front-end components during service. Confirm rotor thickness and overall height against the removed part to ensure proper fit on the Ford F-250 Super Duty or Ford F-350 Super Duty front axle.
Quality assurance
DuraGo manufactures aftermarket brake components through ISO-certified factories and focuses on fit, form, and function. The brand has more than 45 years of manufacturing history and supplies brake drums and rotors for professional repair use.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2002 | Ford | F-350 Super Duty | RWD | Front | SRW; Twin I-Beam Axle |
| 2001 | Ford | F-250 Super Duty | RWD | Front | Twin I-Beam Axle |
| 2001 | Ford | F-350 Super Duty | RWD | Front | SRW; Twin I-Beam Axle |
| 2000 | Ford | F-250 Super Duty | RWD | Front | Twin I-Beam Axle |
| 2000 | Ford | F-350 Super Duty | RWD | Front | SRW; Twin I-Beam Axle |
| 1999 | Ford | F-250 Super Duty | RWD | Front | Twin I-Beam Axle |
| 1999 | Ford | F-350 Super Duty | RWD | Front | SRW; Twin I-Beam Axle |
| No rows match your filter. | |||||