/live/media/PR/PR_BR54128_Fro.jpg)
DuraGo BR54128 Disc Brake Rotor - Front
| Brand | DuraGo BR54128 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 5.09 |
| Center Hole Diameter | 129.3 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 1.47 |
| Discard Thickness | 37.39 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 6.69 |
| Mounting Bolt Hole Circle Diameter | 170 |
| Mounting Bolt Hole Diameter | 0.64 |
| Mounting Bolt Hole Diameter | 16.2 |
| Mounting Bolt Hole Quantity | 10 |
| Nominal Thickness | 1.54 |
| Nominal Thickness | 39.1 |
| Outside Diameter | 14.53 |
| Outside Diameter | 369 |
| Overall Height | 3.87 |
| Overall Height | 98.4 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Ford · 2 vehicles |
Cast iron construction. Full-cast rotor design delivers dependable braking performance.
Vented rotor design. Helps air flow through the rotor for more consistent cooling.
Non-directional brake surface. Supports even contact and smooth, predictable braking.
Cross-references Four Seasons 54128, Parts Authority PRT5615 and Raybestos Brakes 680305 for the same application. See all 10.
DuraGo BR54128 Front Brake Rotor
The DuraGo BR54128 is a vented front disc brake rotor built from cast iron for 2015-2016 Ford F-350 Super Duty 10-lug applications. It is a conventional, full-cast rotor with a non-directional brake surface for consistent pad contact and service-friendly replacement fitment.
Key Features
- Cast iron construction for dependable braking performance
- Vented, conventional rotor design for front axle use
- Non-directional brake surface for straightforward pad bedding
- Full-cast construction
- 10 mounting bolt holes with a 6.69 in. bolt circle diameter
- Outside diameter: 14.53 in. | Overall height: 3.87 in.
- Nominal thickness: 1.54 in. | Discard thickness: 1.47 in.
- Center hole diameter: 5.09 in.
Detailed Description
Built for the front position on the Ford F-350 Super Duty, part number BR54128 matches the listed 10-lug configuration and uses a vented rotor profile to support heat management during braking. The cast iron, full-cast design follows DuraGo’s aftermarket brake program standards, with manufacturing from ISO-certified factories focused on fit, form, and function. This rotor is also cross-referenced to Four Seasons 54128 and Raybestos Brakes 680305 for the same application.
What It Helps Address
- Front brake pulsation caused by worn rotor surfaces
- Reduced braking consistency from rotor wear beyond discard thickness
- Brake noise related to uneven rotor contact surfaces
- Service replacement needs on 2015-2016 Ford F-350 Super Duty front brakes
- Fitment matching for 10-lug heavy-duty front brake service
Installation Notes and Tips
Fits 2015-2016 Ford F-350 Super Duty, front. Verify rotor dimensions, bolt pattern, and hub fitment before installation. Inspect pads, calipers, and hub surfaces during service, and clean mating surfaces to help ensure proper rotor seating and brake feel. Follow the vehicle manufacturer’s service procedures for torque and bedding.
Quality Assurance
DuraGo manufactures brake drums and rotors through ISO-certified factories and builds this rotor to meet fit, form, and function requirements for aftermarket service. Part number BR54128 is backed by DuraGo’s long-running brake product program and cataloging support for professional repair applications.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2016 | Ford | F-350 Super Duty | 4WD | Front | 10 Lug |
| 2015 | Ford | F-350 Super Duty | 4WD | Front | 10 Lug |
| No rows match your filter. | |||||