/live/media/PR/PR_BR54130_Fro.jpg)
DuraGo BR54130 Disc Brake Rotor - Front
| Brand | DuraGo BR54130 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.8 |
| Center Hole Diameter | 71.2 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 1.12 |
| Discard Thickness | 28.4 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Diameter | 0.6 |
| Mounting Bolt Hole Diameter | 15.2 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 1.18 |
| Nominal Thickness | 30 |
| Outside Diameter | 11.53 |
| Outside Diameter | 292.9 |
| Overall Height | 1.89 |
| Overall Height | 48.1 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Ford · 6 vehicles |
Vented design. Helps promote airflow for more consistent braking performance.
Cast iron construction. Provides the strength and heat capacity expected in a brake rotor.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references Four Seasons 54130, Parts Authority PRT5616 and Raybestos Brakes 680313 for the same application. See all 10.
DuraGo BR54130 Front Brake Rotor
The DuraGo BR54130 is a vented front disc brake rotor built from cast iron for 2005-2010 Ford Mustang applications. It is a conventional, full-cast rotor with a non-directional brake surface for straightforward service and consistent pad contact.
Key Features
- Fits 2005-2010 Ford Mustang, front
- Part number BR54130 for easy catalog matching
- Cast iron, full-cast construction
- Vented rotor design for front brake use
- Non-directional brake surface
- Conventional rotor design with 5-bolt mounting pattern
- Outside diameter: 11.53 in. (292.9 mm)
- Center hole diameter: 2.8 in. (71.2 mm)
- Mounting bolt circle diameter: 4.5 in. (114.3 mm)
Detailed Description
DuraGo BR54130 is engineered as a direct-fit front brake rotor for the 2005-2010 Ford Mustang. The vented cast iron design supports heat management during repeated braking, while the non-directional surface helps simplify rotor service and pad bedding. With a nominal thickness of 1.18 in. (30 mm) and discard thickness of 1.12 in. (28.4 mm), this rotor is built to meet standard replacement requirements for the listed Mustang front brake application. DuraGo manufactures brake drums and rotors through ISO-certified factories, with attention to fit, form, and function for aftermarket brake service. This part cross-references Raybestos Brakes 680313 for the same application.
What It Helps Address
- Brake pulsation caused by worn or out-of-spec front rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Noise and vibration related to rotor wear
- Service replacement for a front rotor on a 2005-2010 Ford Mustang
- Fitment issues when replacing the original rotor with the correct bolt pattern and dimensions
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation on the Ford Mustang front axle. Clean the hub mounting surface thoroughly to help prevent runout-related brake pulsation. Inspect pads, calipers, and hardware condition during service, and follow the vehicle manufacturer’s brake bedding procedure after installation. Confirm the rotor is installed on the front position only for the listed application.
Quality Assurance
DuraGo backs this rotor with manufacturing standards developed through more than 45 years in the aftermarket and production in ISO-certified factories. The BR54130 is built to meet fit, form, and function requirements for the specified Ford Mustang front brake application.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2010 | Ford | Mustang | 4.0L | V6 | Front | — |
| 2009 | Ford | Mustang | 4.0L | V6 | Front | — |
| 2008 | Ford | Mustang | 4.0L | V6 | Front | — |
| 2007 | Ford | Mustang | 4.0L | V6 | Front | — |
| 2006 | Ford | Mustang | 4.0L | V6 | Front | — |
| 2005 | Ford | Mustang | 4.0L | V6 | Front | — |
| No rows match your filter. | ||||||