/live/media/PR/PR_BR5460_Fro.jpg)
DuraGo BR5460 Disc Brake Rotor and Hub Assembly - Front
| Brand | DuraGo BR5460 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 1.12 |
| Discard Thickness | 28.5 |
| Inner Bearing Cup Included | Yes |
| Mounting Bolt Hole Circle Diameter | 5.5 |
| Mounting Bolt Hole Circle Diameter | 139.7 |
| Nominal Thickness | 1.19 |
| Nominal Thickness | 30.1 |
| Outer Bearing Cup Included | Yes |
| Overall Height | 2.97 |
| Overall Height | 75.5 |
| Rotor Outside Diameter | 11.71 |
| Rotor Outside Diameter | 297.5 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Stud Quantity | 5 |
| Stud Thread Size | 1/2-20 |
| Wheel Studs Included | Yes |
| Fits | Ford · 4 vehicles |
OE-style fit. Manufactured to meet fit, form, and function requirements.
Vented rotor. Helps promote efficient airflow through the braking surface.
Bearing cups included. Ready for a more complete hub assembly installation.
Cross-references Continental 60879, Gates 6932 and 5460 for the same application. See all 9.
DuraGo BR5460 Front Disc Brake Rotor and Hub Assembly
The DuraGo BR5460 is a front disc brake rotor and hub assembly built for 1987-1988 Ford Bronco and 1987-1988 Ford F-150 applications with manual locking hubs. It combines rotor and hub service into one OE-style replacement part for a direct-fit repair on the front axle.
Key Features
- Front disc brake rotor and hub assembly for Ford Bronco and Ford F-150
- Fits 1987-1988 Ford Bronco, front, manual locking hubs
- Fits 1987-1988 Ford F-150, front, manual locking hubs
- Vented rotor design for front brake service
- 11.71 in. rotor outside diameter
- 1.19 in. nominal thickness and 1.12 in. discard thickness
- 5-stud hub pattern with 1/2-20 stud thread size
- Includes inner bearing cup, outer bearing cup, and wheel studs
- Non-directional brake surface for service-friendly installation
- 5.5 in. bolt circle diameter
Detailed Description
DuraGo BR5460 is engineered for front brake applications that require a rotor and hub assembly with manual locking hubs. The vented rotor construction, 297.5 mm outside diameter, and 75.5 mm overall height support proper fitment on the specified Ford Bronco and Ford F-150 models. DuraGo manufactures its brake drum and rotor program through ISO-certified factories, with attention to fit, form, and function for aftermarket brake service. This part cross-references Continental 60879 for the same application.
Common Repair Uses
- Replacing a worn or warped front rotor on a 1987-1988 Ford Bronco
- Servicing front brake vibration or pulsation on a 1987-1988 Ford F-150
- Restoring hub and rotor assembly fit on manual locking hub front ends
- Addressing brake surface wear that has reached discard thickness
- Repairing front-end brake noise caused by uneven rotor wear
Installation Notes and Tips
Confirm manual locking hub configuration before ordering. Verify rotor thickness, bearing cup condition, and wheel stud fitment during installation. Clean the hub mounting surface thoroughly and inspect related front brake components for wear before reassembly. Use the vehicle’s service specifications for torque and bearing adjustment.
Quality Assurance
DuraGo has more than 45 years of aftermarket manufacturing experience and produces brake components through ISO-certified factories. The BR5460 is built to meet fit, form, and function requirements for the listed Ford Bronco and Ford F-150 applications.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1988 | Ford | Bronco | — | Front | Manual Locking Hubs |
| 1988 | Ford | F-150 | 4WD | Front | Manual Locking Hubs |
| 1987 | Ford | Bronco | — | Front | Manual Locking Hubs |
| 1987 | Ford | F-150 | 4WD | Front | Manual Locking Hubs |
| No rows match your filter. | |||||