/live/media/PR/PR_BR5473_Fro.jpg)
DuraGo BR5473 Disc Brake Rotor and Hub Assembly - Front
| Brand | DuraGo BR5473 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.81 |
| Discard Thickness | 20.6 |
| Inner Bearing Cup Included | Yes |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Nominal Thickness | 0.87 |
| Nominal Thickness | 22.1 |
| Outer Bearing Cup Included | Yes |
| Overall Height | 2.48 |
| Overall Height | 63 |
| Rotor Outside Diameter | 10.87 |
| Rotor Outside Diameter | 276 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Stud Quantity | 5 |
| Stud Thread Size | 1/2-20 |
| Wheel Studs Included | Yes |
| Fits | Ford and Mazda · 12 vehicles |
Vented rotor design. Promotes efficient airflow for more consistent braking performance.
Bearing cups included. Ready for a more complete hub assembly installation.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references Four Seasons 66416, Parts Authority PRT1860 and 1F0033251 for the same application. See all 14.
DuraGo BR5473 Front Disc Brake Rotor and Hub Assembly
The DuraGo BR5473 is a front disc brake rotor and hub assembly built for specific Ford and Mazda applications. It combines the rotor and hub into one service part, with vented construction, 5 wheel studs, and included inner and outer bearing cups for a direct front-end brake service.
Key Features
- Part number: BR5473
- Front disc brake rotor and hub assembly
- Vented rotor design for front brake applications
- Rotor outside diameter: 10.87 in. / 276 mm
- Nominal thickness: 0.87 in. / 22.1 mm
- Discard thickness: 0.81 in. / 20.6 mm
- 5-stud hub with 1/2-20 stud thread size
- Mounting bolt hole circle diameter: 4.5 in. / 114.3 mm
- Non-directional brake surface
- Inner bearing cup and outer bearing cup included
- Wheel studs included
Detailed Description
DuraGo BR5473 is manufactured by ISO-certified factories and reflects the brand’s long-running focus on aftermarket brake components with attention to fit, form, and function. This front rotor and hub assembly is built for service on 1990-1994 Ford Ranger front applications, 1991-1992 Ford Explorer front applications with 2.5 inch overall height, 1990 Ford Bronco II front applications with 2.5 inch overall height, and 1991-1992 Mazda Navajo front applications. It also fits 1994 Mazda B3000 front and 1994 Mazda B4000 front applications. This part cross-references Four Seasons 66416 for the same application.
Common Problems This Part Addresses
- Front brake pulsation from worn or out-of-spec rotor surfaces
- Excessive rotor wear that reaches discard thickness
- Hub service needs on vehicles with integrated rotor and hub design
- Noise or looseness related to worn bearing cup interfaces
- Brake service on Ford Ranger, Ford Explorer, Mazda Navajo, Mazda B3000, and Mazda B4000 front axles
Installation Notes and Tips
Verify rotor dimensions, bearing fitment, and stud pattern before installation. This assembly uses a vented rotor design with a non-directional braking surface, so surface orientation is not a concern during installation. Confirm the vehicle’s front application details, including the Ford Ranger exception for axle code 84 gear ratio 3.45 and the 1991-1992 Ford Explorer and 1990 Ford Bronco II 2.5 inch overall height notes, before ordering.
Quality Assurance
DuraGo manufactures brake products through ISO-certified factories and builds this rotor and hub assembly to meet fit, form, and function requirements for the listed applications. The BR5473 part number is supported by DuraGo’s aftermarket brake program and cataloging focus for professional repair use.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1994 | Ford | Ranger | 4WD | Front | Except Axle Code 84 Gear Ratio 3.45 |
| 1994 | Mazda | B3000 | 4WD | Front | — |
| 1994 | Mazda | B4000 | 4WD | Front | — |
| 1993 | Ford | Ranger | 4WD | Front | Except Axle Code 84 Gear Ratio 3.45 |
| 1992 | Ford | Explorer | 4WD | Front | 2.5 Inch Overall Height |
| 1992 | Ford | Ranger | 4WD | Front | Except Axle Code 84 Gear Ratio 3.45 |
| 1992 | Mazda | Navajo | 4WD | Front | — |
| 1991 | Ford | Explorer | 4WD | Front | 2.5 Inch Overall Height |
| 1991 | Ford | Ranger | 4WD | Front | Except Axle Code 84 Gear Ratio 3.45 |
| 1991 | Mazda | Navajo | — | Front | — |
| 1990 | Ford | Bronco II | 4WD | Front | 2.5 Inch Overall Height |
| 1990 | Ford | Ranger | 4WD | Front | Except Axle Code 84 Gear Ratio 3.45 |
| No rows match your filter. | |||||