/live/media/PR/PR_BR5555_Fro.jpg)
DuraGo BR5555 Disc Brake Rotor - Front
| Brand | DuraGo BR5555 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.78 |
| Center Hole Diameter | 70.7 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.72 |
| Discard Thickness | 18.4 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.75 |
| Mounting Bolt Hole Circle Diameter | 120.65 |
| Mounting Bolt Hole Diameter | 0.51 |
| Mounting Bolt Hole Diameter | 13 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.79 |
| Nominal Thickness | 20 |
| Outside Diameter | 11.5 |
| Outside Diameter | 292 |
| Overall Height | 2.52 |
| Overall Height | 63.9 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Chevrolet · 4 vehicles |
OE-style fit. Manufactured to meet fit, form, and function requirements.
Vented design. Helps air flow through the rotor for more consistent braking.
Cast iron construction. Full cast rotor with a non-directional brake surface.
Cross-references Carter P5001, FEL-PRO 60826 and Hayden 5001 for the same application. See all 10.
DuraGo BR5555 Front Brake Rotor
The DuraGo BR5555 is a front disc brake rotor built for 1984-1987 Chevrolet Corvette applications. It uses a full cast, vented cast iron construction with a non-directional brake surface to support consistent pad contact and straightforward service work.
Key Features
- Fits 1984-1987 Chevrolet Corvette, front
- Part number BR5555
- Cast iron, full cast construction
- Vented rotor design for front brake use
- Non-directional brake surface
- Outside diameter: 11.5 in. (292 mm)
- Nominal thickness: 0.79 in. (20 mm)
- Discard thickness: 0.72 in. (18.4 mm)
- 5-bolt mounting pattern with 4.75 in. (120.65 mm) bolt circle
- Center hole diameter: 2.78 in. (70.7 mm)
Product Details
DuraGo brake rotors are manufactured in ISO-certified factories with attention to fit, form, and function. The BR5555 follows the brand’s aftermarket brake program focus on catalog accuracy and application coverage, making it a direct replacement choice for front brake service on the Chevrolet Corvette. This part cross-references Monroe Shocks & Struts (e.g., 5555) for the same application.
What This Rotor Helps Address
- Front brake pulsation caused by worn or uneven rotor surfaces
- Brake noise related to rotor surface condition
- Reduced braking consistency from rotor wear beyond discard thickness
- Service replacement needs for 1984-1987 Chevrolet Corvette front brakes
- Fitment matching for OE-style rotor dimensions and bolt pattern
Installation Notes
Verify rotor dimensions, hub fit, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related issues. Always inspect pads, calipers, and wheel bearings during brake service, and measure rotor thickness after installation to confirm it remains above discard limits.
Quality Assurance
DuraGo manufactures this rotor in ISO-certified facilities and builds its brake program around fit, form, and function requirements for aftermarket service parts.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1987 | Chevrolet | Corvette | Front | — |
| 1986 | Chevrolet | Corvette | Front | — |
| 1985 | Chevrolet | Corvette | Front | — |
| 1984 | Chevrolet | Corvette | Front | — |
| No rows match your filter. | ||||