/live/media/PR/PR_BR900294_Fro.jpg)
DuraGo BR900294 Disc Brake Rotor - Rear
| Brand | DuraGo BR900294 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.68 |
| Center Hole Diameter | 68 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.63 |
| Discard Thickness | 16 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Diameter | 0.5 |
| Mounting Bolt Hole Diameter | 12.8 |
| Mounting Bolt Hole Quantity | 6 |
| Nominal Thickness | 0.71 |
| Nominal Thickness | 18 |
| Outside Diameter | 12.11 |
| Outside Diameter | 307.6 |
| Overall Height | 2.44 |
| Overall Height | 62 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Nissan · 8 vehicles |
OE-style fitment. Built to meet fit, form, and function requirements.
Vented design. Helps air flow through the rotor more efficiently.
Cast iron construction. Full cast rotor for dependable braking performance.
Cross-references Gates 31429, Parts Authority PRT5774 and Raybestos Brakes 980462 for the same application. See all 10.
DuraGo BR900294 Rear Brake Rotor for Pathfinder
The DuraGo BR900294 is a vented, full cast disc brake rotor built for rear brake service on select Nissan Pathfinder models. It uses cast iron construction, a non-directional brake surface, and a drum-in-hat design to match the rear brake setup on 2005-2012 Nissan Pathfinder applications.
Key Features
- Fits 2005-2012 Nissan Pathfinder, rear
- Part number: BR900294
- Cast iron, full cast rotor construction
- Vented rotor design for rear brake applications
- Drum-in-hat type rotor configuration
- Non-directional brake surface
- Outside diameter: 12.11 in. (307.6 mm)
- Nominal thickness: 0.71 in. (18 mm)
- Discard thickness: 0.63 in. (16 mm)
- 6-bolt mounting pattern with 4.5 in. bolt circle diameter
Product Details
DuraGo manufactures this rotor through ISO-certified factories with attention to fit, form, and function. The BR900294 is engineered for rear brake replacement on the Nissan Pathfinder and follows the dimensional requirements needed for proper rotor fitment, including a 2.68 in. center hole diameter, 2.44 in. overall height, and 0.5 in. mounting bolt hole diameter. This part cross-references Raybestos Brakes 980462 for the same application.
Common Brake Issues This Rotor Can Address
- Rear brake pulsation from rotor wear or thickness variation
- Brake noise caused by an uneven rotor surface
- Reduced braking consistency from a worn rear rotor
- Service replacement for a rotor that has reached discard thickness
- Fitment replacement for rear brake service on a Nissan Pathfinder
Installation Notes and Tips
Verify rear fitment before installation on 2005-2012 Nissan Pathfinder models. Check rotor thickness, hub condition, and brake surface condition during service, and confirm the drum-in-hat parking brake area is clean and within specification. Always follow the vehicle service manual for torque and brake system procedures.
Quality Assurance
DuraGo brake rotors are produced in ISO-certified factories and built to meet fit, form, and function requirements for aftermarket brake service. The brand has a long history in automotive aftermarket manufacturing, and the BR900294 reflects that cataloged application coverage for rear Nissan Pathfinder brake repair.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2012 | Nissan | Pathfinder | Rear | — |
| 2011 | Nissan | Pathfinder | Rear | — |
| 2010 | Nissan | Pathfinder | Rear | — |
| 2009 | Nissan | Pathfinder | Rear | — |
| 2008 | Nissan | Pathfinder | Rear | — |
| 2007 | Nissan | Pathfinder | Rear | — |
| 2006 | Nissan | Pathfinder | Rear | — |
| 2005 | Nissan | Pathfinder | Rear | — |
| No rows match your filter. | ||||