/live/media/PR/PR_BR90029601_Fro.jpg)
DuraGo BR900296-01 Disc Brake Rotor - Front
| Brand | DuraGo BR900296-01 |
|---|---|
| Position | Front |
| Material | Cast iron |
| Discard Thickness | 1.02 |
| Discard Thickness | 26 |
| Nominal Thickness | 1.1 |
| Nominal Thickness | 28 |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 1.9 |
| Overall Height | 48.3 |
| Outside Diameter | 11.65 |
| Outside Diameter | 296 |
| Mounting Bolt Hole Quantity | 5 |
| ABS Tone Ring Included | No |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 2.83 |
| Center Hole Diameter | 72 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Diameter | 0.56 |
| Mounting Bolt Hole Diameter | 14.1 |
| Directional or Non-Directional Brake Surface | Non-directional |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Slotted | No |
| Fits | Ford and Lincoln · 6 vehicles |
Corrosion-resistant coating. Protects the hat and edge for lasting defense against rust.
Vented design. Helps air flow through the rotor for more consistent braking.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references 7T4Z1125B and 7U2Z1V125DA for the same application. See all 2.
DuraGo Titanium Series Front Brake Rotor
The DuraGo Titanium Series brake rotor is a front disc brake rotor built for 2007-2009 Ford Edge and 2007-2009 Lincoln MKX applications. Part number BR900296-01 combines cast iron construction with a corrosion-resistant coating on the hat and edge to help maintain a cleaner appearance and added protection in exposed wheel setups.
Manufactured in an ISO-certified factory, this vented rotor is engineered to meet fit, form, and function requirements for the listed vehicles. The titanium gray finish also complements open wheel designs on Ford Edge and Lincoln MKX models.
Key Features
- Part number BR900296-01
- Front disc brake rotor for 2007-2009 Ford Edge and 2007-2009 Lincoln MKX
- Vented, conventional rotor design
- Cast iron, full cast construction
- Rust-resistant coating on the hat and edge
- Non-directional brake surface
- 296 mm outside diameter
- 5-bolt mounting pattern with 114.3 mm bolt circle
- Center hole diameter: 72 mm
- No cross-drilling or ?????ting
Detailed Description
DuraGo BR900296-01 is a Titanium Series front brake rotor engineered for direct replacement on 2007-2009 Ford Edge and 2007-2009 Lincoln MKX vehicles. The rotor uses a vented cast iron design with a non-directional braking surface to support consistent pad contact and straightforward serviceability. Its corrosion-resistant coating protects the hat and edge, while the titanium gray finish helps the rotor look cleaner behind open wheel designs. This part cross-references Ford/Lincoln OE numbers 7T4Z1125B and 7U2Z1V125DA for the same application.
Common Uses
- Replacing a worn front rotor on a Ford Edge or Lincoln MKX
- Addressing brake pulsation caused by rotor wear or thickness loss
- Restoring braking performance after heat checking or surface corrosion
- Correcting noise or uneven pad contact related to rotor condition
- Updating a rusted rotor with a coated replacement for cleaner appearance
Installation Notes and Tips
Verify rotor diameter, bolt pattern, center hole size, and front position before installation. Inspect brake pads, caliper hardware, and hub condition at the same time, and clean the hub mounting surface to help prevent rotor runout. Follow the vehicle service procedure for torque specifications and bedding-in the pads after installation. Fits 2007-2009 Ford Edge, front. Fits 2007-2009 Lincoln MKX, front.
Quality Assurance
DuraGo manufactures this rotor in an ISO-certified factory and builds it to meet fit, form, and function requirements for the listed applications. The Titanium Series design reflects DuraGo’s experience in brake components and focuses on corrosion protection, dimensional accuracy, and service-ready construction.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2009 | Ford | Edge | Front | 296 mm Rotor Diameter; Coated Hat and Edge for Rust Resistance |
| 2009 | Lincoln | MKX | Front | 296 mm Rotor Diameter; Coated Hat and Edge for Rust Resistance |
| 2008 | Ford | Edge | Front | 296 mm Rotor Diameter; Coated Hat and Edge for Rust Resistance |
| 2008 | Lincoln | MKX | Front | 296 mm Rotor Diameter; Coated Hat and Edge for Rust Resistance |
| 2007 | Ford | Edge | Front | 296 mm Rotor Diameter; Coated Hat and Edge for Rust Resistance |
| 2007 | Lincoln | MKX | Front | 296 mm Rotor Diameter; Coated Hat and Edge for Rust Resistance |
| No rows match your filter. | ||||