DuraGo BR900336 Disc Brake Rotor - Front

Overview of DuraGo BR900336 Disc Brake Rotor

The DuraGo BR900336 is a cast iron vented disc brake rotor designed for reliable braking performance. Engineered for select Lexus and Toyota models, this rotor offers consistent stopping power and durability for vehicles like the Land Cruiser, LX570, Sequoia, and Tundra.

• Constructed from full cast iron for strength and heat dissipation
• Vented rotor design to improve cooling during braking
• Nominal thickness of 1.26 inches (32 mm) with discard thickness at 1.14 inches (29 mm)
• Overall height of 3.28 inches (83.2 mm) for proper fitment
• Outside diameter of 13.94 inches (354 mm) compatible with specified vehicles
• Five mounting bolt holes with a 5.91 inch (150 mm) bolt circle diameter
• Non-directional brake surface for flexible installation
• Conventional rotor type without ABS tone ring

Detailed Product Description

The DuraGo BR900336 disc brake rotor is manufactured from durable cast iron, providing a balance of strength and thermal conductivity essential for effective braking. Its vented construction allows air to circulate between the rotor surfaces, reducing heat buildup and helping to maintain braking performance under demanding conditions. With a nominal thickness of 1.26 inches (32 mm) and a discard thickness of 1.14 inches (29 mm), this rotor meets the specifications required for safe and reliable operation. The rotor’s 13.94 inch (354 mm) outside diameter and 3.28 inch (83.2 mm) overall height ensure proper fitment on compatible Lexus and Toyota models, including the Land Cruiser, LX570, Sequoia, and Tundra. The five mounting bolt holes with a 0.65 inch (16.6 mm) diameter and 5.91 inch (150 mm) bolt circle diameter provide secure attachment to the vehicle’s hub assembly. This rotor features a non-directional brake surface, allowing installation on either side without affecting performance. It is a conventional rotor type without cross-drilling or slotting and does not include an ABS tone ring.

Compatible Vehicles and Applications

• Lexus Land Cruiser
• Lexus LX570
• Toyota Sequoia
• Toyota Tundra

This rotor is designed specifically for these models, ensuring proper fitment and braking performance when replacing worn or damaged rotors.

Common Issues Addressed by DuraGo BR900336

• Brake rotor warping causing vibration during braking
• Excessive rotor wear reducing braking efficiency
• Overheating of brake components under heavy use
• Uneven rotor surface leading to brake noise or pulsation
• Corrosion or damage to existing rotors affecting safety

Installation Notes and Tips

• Ensure the rotor thickness is above the discard thickness of 1.14 inches (29 mm) before installation
• Clean the hub surface to prevent rotor runout and ensure proper seating
• Torque mounting bolts to manufacturer specifications for secure fitment
• Check brake pads for wear and replace if necessary during rotor installation
• Perform a brake system test after installation to verify proper operation

Quality Assurance and Warranty

DuraGo disc brake rotors are manufactured to meet industry standards for material quality and dimensional accuracy. While specific warranty details for part number BR900336 are not provided, DuraGo products typically come with a limited warranty against defects in materials and workmanship. It is recommended to consult the product documentation or supplier for exact warranty terms.