/live/media/PR/PR_BR900352_Fro.jpg)
DuraGo BR900352 Disc Brake Rotor - Rear
| Brand | DuraGo BR900352 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.83 |
| Center Hole Diameter | 72 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.63 |
| Discard Thickness | 16 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Diameter | 0.51 |
| Mounting Bolt Hole Diameter | 13 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.71 |
| Nominal Thickness | 18 |
| Outside Diameter | 11.88 |
| Outside Diameter | 301.7 |
| Overall Height | 2.2 |
| Overall Height | 55.8 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Mazda · 6 vehicles |
Vented design. Helps promote efficient airflow through the rotor.
Full cast construction. Cast iron build for dependable braking performance.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references Gates 31459, Raybestos Brakes 980523 and 900352 for the same application. See all 11.
DuraGo BR900352 Rear Brake Rotor
The DuraGo BR900352 is a rear disc brake rotor for select 2007-2012 Mazda CX-7 applications. Built from cast iron with a full cast construction, it is made for drivers replacing a worn rear rotor on a Mazda CX-7 and looking for a direct-fit brake service part.
Key Features
- Fits 2007-2012 Mazda CX-7, rear
- Part number BR900352 for easy catalog matching
- Cast iron construction with full cast design
- Vented rotor style for rear brake service
- Non-directional brake surface for straightforward installation orientation
- 5-bolt mounting pattern with 114.3 mm bolt circle diameter
- Outside diameter: 301.7 mm (11.88 in.)
- Nominal thickness: 18 mm (0.71 in.); discard thickness: 16 mm (0.63 in.)
- Center hole diameter: 72 mm (2.83 in.)
- Drum-in-hat rotor configuration
Detailed Description
DuraGo BR900352 is a rear drum-in-hat disc brake rotor engineered for the 2007-2012 Mazda CX-7. The rotor uses cast iron construction and a vented design to match the original brake layout, while the non-directional surface helps simplify rotor orientation during service. DuraGo manufactures its brake drum and rotor program in ISO-certified factories, with attention to fit, form, and function for professional brake repair. This part cross-references Raybestos Brakes 980523 for the same application.
Common Brake Issues This Rotor Addresses
- Rear brake pulsation caused by rotor wear or thickness variation
- Brake noise related to a worn or uneven rotor surface
- Reduced braking consistency from a rotor at or near discard thickness
- Service replacement needs on a Mazda CX-7 rear brake job
- Corrosion-related rotor deterioration on the braking surface
Installation Notes and Tips
Verify rear fitment by year and vehicle configuration before installation. Inspect pads, caliper hardware, and hub condition during rotor replacement, and clean the hub mounting surface so the rotor seats evenly. Measure rotor thickness and compare it to the discard specification before reuse or replacement. Confirm the 5-lug bolt pattern and center bore alignment on the Mazda CX-7 before final assembly.
Quality Assurance
DuraGo backs this rotor with manufacturing standards focused on fit, form, and function. The brand’s brake program is produced in ISO-certified factories and supported by more than 45 years of aftermarket product development.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2012 | Mazda | CX-7 | Rear | — |
| 2011 | Mazda | CX-7 | Rear | — |
| 2010 | Mazda | CX-7 | Rear | — |
| 2009 | Mazda | CX-7 | Rear | — |
| 2008 | Mazda | CX-7 | Rear | — |
| 2007 | Mazda | CX-7 | Rear | — |
| No rows match your filter. | ||||