/live/media/PR/PR_BR900359_Fro.jpg)
DuraGo BR900359 Disc Brake Rotor - Front or Rear
| Brand | DuraGo BR900359 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 5.49 |
| Center Hole Diameter | 139.4 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 1.47 |
| Discard Thickness | 37.4 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 6.42 |
| Mounting Bolt Hole Circle Diameter | 163 |
| Mounting Bolt Hole Diameter | 0.51 |
| Mounting Bolt Hole Diameter | 13 |
| Mounting Bolt Hole Quantity | 10 |
| Nominal Thickness | 1.54 |
| Nominal Thickness | 39 |
| Outside Diameter | 15.35 |
| Outside Diameter | 390 |
| Overall Height | 4.89 |
| Overall Height | 124.2 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Ford · 3 vehicles |
Cast iron construction. Provides the strength and heat capacity expected in a brake rotor.
Vented design. Helps promote airflow for more consistent braking performance.
Full cast rotor. Built as a one-piece design for dependable fit, form, and function.
Cross-references Four Seasons 54138, Raybestos Brakes 680374 and Raybestos Brakes 780777 for the same application. See all 12.
DuraGo BR900359 Rear Rotor for Ford F-350 Super Duty
The DuraGo BR900359 is a rear disc brake rotor built for the 2015 Ford F-350 Super Duty. It features a full cast, vented design with a non-directional brake surface for consistent braking performance and straightforward service replacement.
Key Features
- Cast iron construction for dependable braking strength
- Full cast rotor design
- Vented rotor for improved heat management
- Non-directional brake surface
- Drum-in-hat rotor configuration
- Outside diameter: 390 mm (15.35 in.)
- Nominal thickness: 39 mm (1.54 in.)
- Discard thickness: 37.4 mm (1.47 in.)
- Center hole diameter: 139.4 mm (5.49 in.)
- 10 mounting bolt holes with 163 mm (6.42 in.) bolt circle diameter
Detailed Description
Built by DuraGo, part number BR900359 is manufactured in ISO-certified factories to meet fit, form, and function requirements for aftermarket brake service. This rear rotor is engineered for the 2015 Ford F-350 Super Duty and uses a vented, drum-in-hat layout with a cast iron, full cast construction. The non-directional surface supports service installation and brake pad contact consistency, while the rotor dimensions help match the original application requirements. This part cross-references Four Seasons 54138 for the same application.
Common Brake Service Issues
- Rear brake pulsation from rotor wear or thickness variation
- Brake noise caused by uneven rotor surfaces
- Reduced braking performance from heat-related rotor fatigue
- Service replacement needs on a worn rear drum-in-hat rotor
- Fitment replacement for a 2015 Ford F-350 Super Duty rear brake repair
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and center bore before installation on the 2015 Ford F-350 Super Duty. Clean the hub mounting surface thoroughly to help prevent runout concerns, and inspect pads, caliper hardware, and wheel bearings during brake service. Follow the vehicle manufacturer’s torque specifications and bedding procedure after installation. DuraGo BR900359 is also referenced by aftermarket part numbers including AX900359 and PRT5731.
Quality Assurance
DuraGo has more than 45 years of aftermarket manufacturing experience and supplies brake drums and rotors through ISO-certified production facilities. The brand focuses on catalog accuracy and application coverage for professional brake service.
| Year | Make | Model | Submodel | Body Type | Position | Notes |
|---|---|---|---|---|---|---|
| 2015 | Ford | F-350 Super Duty | XL | Cab & Chassis | Rear | — |
| 2015 | Ford | F-350 Super Duty | XLT | Cab & Chassis | Rear | — |
| 2015 | Ford | F-350 Super Duty | Lariat | Cab & Chassis | Rear | — |
| No rows match your filter. | ||||||