DuraGo BR900362 Disc Brake Rotor and Hub Assembly - Front

DuraGo BR900362 Front Disc Brake Rotor and Hub Assembly

The DuraGo BR900362 is a front disc brake rotor and hub assembly built for heavy-duty Ford Super Duty applications. It combines the rotor, hub, ABS tone ring, inner bearing cup, outer bearing cup, and wheel studs in one service part for direct replacement on select Ford F-250 Super Duty and Ford F-350 Super Duty models.

Key Features

• Front disc brake rotor and hub assembly for select Ford Super Duty trucks
• Vented rotor design with a 13.66 in. (347 mm) outside diameter
• Nominal thickness: 1.50 in. (38 mm); discard thickness: 1.43 in. (36.4 mm)
• 8-stud hub with M14 x 1.5 stud thread size
• ABS tone ring included for vehicles equipped with ABS
• Inner bearing cup and outer bearing cup included
• Wheel studs included
• Non-directional brake surface for consistent pad contact
• Mounting bolt hole circle diameter: 170 mm (6.69 in.)

Detailed Description

DuraGo BR900362 is engineered as a service replacement for front brake applications on 2008-2013 Ford F-350 Super Duty SRW and 2008-2012 Ford F-250 Super Duty. The vented rotor design supports heat management in demanding truck use, while the integrated hub and bearing cup configuration simplifies brake and hub service on the front axle. This part number, BR900362, is also referenced in aftermarket catalogs under cross-reference numbers such as Raybestos Brakes 680640 and Parts Authority PRT5829 for the same application.

DuraGo has more than 45 years of aftermarket manufacturing experience, and its brake drum and rotor program is positioned for professional repair use. Products are produced in ISO-certified factories with attention to fit, form, and function. For buyers searching for a front brake rotor and hub assembly for 2008-2013 Ford F-350 Super Duty SRW or 2008-2012 Ford F-250 Super Duty, BR900362 provides the key dimensions and hardware configuration needed for a direct-fit service replacement.

What It Helps Address

• Front brake pulsation caused by rotor wear or thickness variation
• Hub and rotor service needs on Ford Super Duty front axle applications
• ABS-related service concerns when the tone ring is part of the repair
• Wheel stud replacement needs during front brake and hub maintenance
• Noise or uneven braking associated with worn brake surface condition

Installation Notes and Tips

Verify rotor outside diameter, bolt circle diameter, stud thread size, and bearing cup configuration before installation. This part is for front position use only and is listed for 2008-2013 Ford F-350 Super Duty SRW and 2008-2012 Ford F-250 Super Duty. Clean the hub mounting surface thoroughly, inspect related bearings and brake components, and confirm ABS sensor and tone ring alignment during reassembly. Always compare the old part to BR900362 before final installation.

Quality Assurance

DuraGo manufactures brake components in ISO-certified facilities and builds this rotor and hub assembly to meet fit, form, and function requirements for the listed Ford Super Duty applications. Part number BR900362 is supported by DuraGo’s long-running aftermarket brake program and catalog coverage for professional repair use.