/live/media/PR/PR_BR90037601_Fro.jpg)
DuraGo BR900376-01 Disc Brake Rotor - Front
| Brand | DuraGo BR900376-01 |
|---|---|
| Position | Front |
| Material | Cast iron |
| Discard Thickness | 1.04 |
| Discard Thickness | 26.5 |
| Nominal Thickness | 1.1 |
| Nominal Thickness | 28 |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 2.76 |
| Overall Height | 70.1 |
| Outside Diameter | 12.4 |
| Outside Diameter | 315 |
| Mounting Bolt Hole Quantity | 6 |
| ABS Tone Ring Included | No |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 100.8 |
| Center Hole Diameter | 3.97 |
| Mounting Bolt Hole Circle Diameter | 139.7 |
| Mounting Bolt Hole Circle Diameter | 5.5 |
| Mounting Bolt Hole Diameter | 0.54 |
| Mounting Bolt Hole Diameter | 13.8 |
| Directional or Non-Directional Brake Surface | Non-directional |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Slotted | No |
| Fits | Hummer · 7 vehicles |
Corrosion-resistant coating. Helps protect the rotor hat and edge from rust.
Vented design. Promotes airflow for more efficient braking performance.
Full cast construction. Cast iron rotor built to meet fit, form, and function requirements.
Cross-references 15202106 for the same application. See all 1.
DuraGo BR900376-01 Front Brake Rotor
The DuraGo Titanium Series BR900376-01 is a front disc brake rotor built for 2006-2010 Hummer H3 and 2009-2010 Hummer H3T applications. It combines a cast iron full-cast construction with a rust-resistant coating on the hat and edge to help protect exposed surfaces from corrosion.
The titanium gray finish also suits open-wheel vehicle designs, while the non-directional brake surface supports consistent pad contact. This rotor is manufactured in an ISO certified factory and engineered to meet fit, form, and function requirements for the listed Hummer H3 and Hummer H3T front brake applications.
Key Features
- Part number BR900376-01
- Front disc brake rotor for select Hummer H3 and Hummer H3T models
- Cast iron, full-cast construction
- Vented rotor design for front brake use
- Rust-resistant coating on the hat and edge
- Titanium gray finish for a clean appearance behind open wheels
- Non-directional brake surface
- 6-bolt mounting pattern with 5.5 in. bolt circle
- Outside diameter: 12.4 in. (315 mm)
- Center hole diameter: 3.97 in. (100.8 mm)
Detailed Description
DuraGo BR900376-01 is a vented front brake rotor engineered for direct-fit service on 2006-2010 Hummer H3 and 2009-2010 Hummer H3T models. The rotor uses cast iron construction with a corrosion-resistant coating to help protect the hat and edge from rust, which is especially useful on vehicles with exposed wheel designs. The non-directional braking surface supports even pad contact during service, and the rotor is produced in an ISO certified factory to meet fit, form, and function expectations.
This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application. BR900376-01 is a practical replacement choice when servicing front brake wear on Hummer H3 and Hummer H3T vehicles.
What It Helps Address
- Front brake rotor wear and scoring
- Brake pulsation caused by rotor surface irregularity
- Corrosion on the rotor hat and outer edge
- Reduced braking consistency from worn front rotors
- Visible rust on open-wheel brake components
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub fitment before installation. Clean the hub mounting surface thoroughly to help prevent rotor runout and uneven pad wear. Inspect brake pads, calipers, and hardware condition during service, and follow the vehicle manufacturer’s brake bedding procedure after installation. Fits 2006-2010 Hummer H3, front. Fits 2009-2010 Hummer H3T, front.
Quality Assurance
DuraGo Titanium Series rotors are manufactured in an ISO certified facility and built to meet fit, form, and function requirements for the listed applications. The BR900376-01 part number is engineered using DuraGo’s brake component experience for service-focused replacement use.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Hummer | H3 | Front | Coated Hat and Edge for Rust Resistance |
| 2010 | Hummer | H3T | Front | Coated Hat and Edge for Rust Resistance |
| 2009 | Hummer | H3 | Front | Coated Hat and Edge for Rust Resistance |
| 2009 | Hummer | H3T | Front | Coated Hat and Edge for Rust Resistance |
| 2008 | Hummer | H3 | Front | Coated Hat and Edge for Rust Resistance |
| 2007 | Hummer | H3 | Front | Coated Hat and Edge for Rust Resistance |
| 2006 | Hummer | H3 | Front | Coated Hat and Edge for Rust Resistance |
| No rows match your filter. | ||||