/live/media/PR/PR_BR900402_Fro.jpg)
DuraGo BR900402 Disc Brake Rotor - Rear
| Brand | DuraGo BR900402 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 3.79 |
| Center Hole Diameter | 96.3 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.72 |
| Discard Thickness | 18.4 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 5.5 |
| Mounting Bolt Hole Circle Diameter | 139.7 |
| Mounting Bolt Hole Diameter | 0.5 |
| Mounting Bolt Hole Diameter | 12.6 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.79 |
| Nominal Thickness | 20 |
| Outside Diameter | 12.4 |
| Outside Diameter | 315 |
| Overall Height | 3.09 |
| Overall Height | 78.6 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Kia · 3 vehicles |
Vented design. Helps move air through the rotor for more consistent braking performance.
Full cast construction. Cast iron build delivers dependable strength and heat handling.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references Parts Authority PRT5894, SKF 31495 and 584113E500 for the same application. See all 9.
DuraGo BR900402 Rear Brake Rotor
The DuraGo BR900402 is a rear vented disc brake rotor for 2007-2009 Kia Sorento applications. Built from cast iron with a full cast construction, it is made to match the fit, form, and function expected in a direct replacement rotor.
Key Features
- Fits 2007-2009 Kia Sorento, rear
- Part number BR900402 for easy catalog matching
- Cast iron, full cast rotor construction
- Vented, drum-in-hat type rotor design
- Non-directional brake surface for consistent pad contact
- Outside diameter: 12.4 in. (315 mm)
- Nominal thickness: 0.79 in. (20 mm)
- Discard thickness: 0.72 in. (18.4 mm)
- 5-bolt mounting pattern with 5.5 in. bolt circle diameter
Detailed Description
DuraGo BR900402 is a rear brake rotor engineered for the 2007-2009 Kia Sorento. It uses a vented, drum-in-hat design with a non-directional braking surface to support even pad contact and straightforward service replacement. The rotor measures 12.4 inches in outside diameter, with a 3.79-inch center hole diameter and a 5-bolt mounting pattern. DuraGo manufactures its brake drum and rotor program in ISO-certified factories, with attention to fit, form, and function for professional repair work. This part cross-references SKF 31495 for the same application.
Common Repair Uses
- Rear brake pulsation during stopping
- Rotor wear that has reached discard thickness
- Brake noise caused by uneven rotor surfaces
- Service replacement on a 2007-2009 Kia Sorento rear brake job
- Brake performance loss from heat-worn or warped rotor surfaces
Installation Notes and Tips
Confirm rotor dimensions, hub fit, and rear position before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake vibration. Inspect pads, caliper hardware, and parking brake components during service, and replace worn parts as needed to restore proper braking performance. Verify the rotor is installed on the rear axle of the Kia Sorento listed in the fitment data.
Quality Assurance
DuraGo has more than 45 years of aftermarket manufacturing experience and produces brake components in ISO-certified factories. The BR900402 is built to meet requirements for fit, form, and function in direct replacement brake service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2009 | Kia | Sorento | Rear | — |
| 2008 | Kia | Sorento | Rear | — |
| 2007 | Kia | Sorento | Rear | — |
| No rows match your filter. | ||||