/live/media/PR/PR_BR900582_Fro.jpg)
DuraGo BR900582 Disc Brake Rotor and Hub Assembly - Front
| Brand | DuraGo BR900582 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | Yes |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 1.51 |
| Discard Thickness | 38.4 |
| Inner Bearing Cup Included | Yes |
| Mounting Bolt Hole Circle Diameter | 6.5 |
| Mounting Bolt Hole Circle Diameter | 165.1 |
| Nominal Thickness | 1.57 |
| Nominal Thickness | 40 |
| Outer Bearing Cup Included | Yes |
| Overall Height | 8.03 |
| Overall Height | 204 |
| Rotor Outside Diameter | 13.58 |
| Rotor Outside Diameter | 345 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Stud Quantity | 8 |
| Stud Thread Size | 9/16-18 |
| Wheel Studs Included | Yes |
| Fits | Ford · 18 vehicles |
Vented rotor design. Promotes efficient airflow for more consistent braking performance.
ABS tone ring included. Supports accurate wheel-speed signal integration.
Bearing cups included. Simplifies assembly with key hub components already in place.
Cross-references AP Exhaust 54158, Raybestos Brakes 680626 and 8C2Z1102C for the same application. See all 9.
DuraGo BR900582 Front Rotor and Hub Assembly
The DuraGo BR900582 is a front disc brake rotor and hub assembly built for Ford E-350 Super Duty and Ford E-350 Econoline applications. It combines the rotor, hub, bearing cups, wheel studs, and ABS tone ring in one service part for direct replacement on listed DRW front applications.
Key Features
- Vented front rotor and hub assembly for Ford E-350 Super Duty and Ford E-350 Econoline
- 13.58 in. rotor outside diameter with 1.57 in. nominal thickness and 1.51 in. discard thickness
- 8-stud hub with 9/16-18 stud thread size
- ABS tone ring included for vehicles equipped with wheel speed sensing
- Inner bearing cup and outer bearing cup included
- Wheel studs included
- Non-directional brake surface for consistent pad contact
- Mounting bolt hole circle diameter: 165.1 mm (6.5 in.)
Detailed Description
DuraGo BR900582 is manufactured by ISO-certified factories and follows the brand’s focus on fit, form, and function for aftermarket brake service. This front rotor and hub assembly is specified for 2023-2026 Ford E-350 Super Duty, 2021-2022 Ford E-350 Super Duty, 2008-2019 Ford E-350 Super Duty, and 2008 Ford E-350 Econoline DRW front applications. The vented rotor design, integrated hub, and included ABS tone ring make it a direct-fit service part for front brake repair on these Ford van platforms. This part cross-references Raybestos Brakes 680626 for the same application.
Common Problems This Part Addresses
- Front brake pulsation from rotor wear or thickness variation
- Noise or vibration caused by worn hub and rotor components
- ABS warning concerns related to a damaged tone ring
- Loose or worn wheel stud condition at the front hub
- Service delays when the rotor, hub, and bearing cups are replaced separately
Installation Notes and Tips
Verify front DRW fitment before ordering and confirm the vehicle’s year, model, and brake configuration against the listed applications. Inspect the wheel bearings, pads, and caliper hardware during service, and clean the mounting surfaces before installation. Because this assembly includes a non-directional brake surface, pad bedding should follow standard brake service procedures after installation on a Ford E-350 Super Duty or Ford E-350 Econoline front axle.
Quality Assurance
DuraGo manufactures this brake rotor and hub assembly in ISO-certified facilities to meet fit, form, and function requirements. The BR900582 is built for professional brake service and cataloged for direct replacement on the listed Ford applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2025 | Ford | E-350 Super Duty | Front | DRW |
| 2024 | Ford | E-350 Super Duty | Front | DRW |
| 2023 | Ford | E-350 Super Duty | Front | DRW |
| 2022 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2021 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2019 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2018 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2017 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2016 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2015 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2014 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2013 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2012 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2011 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2010 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2009 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2008 | Ford | E-350 Econoline | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| 2008 | Ford | E-350 Super Duty | Front | Disc Brake Rotor and Hub Assembly fits DRW applications. |
| No rows match your filter. | ||||