/live/media/PR/PR_BR900594_Fro.jpg)
DuraGo BR900594 Disc Brake Rotor - Rear
| Brand | DuraGo BR900594 |
|---|---|
| Position | Rear |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 3.15 |
| Center Hole Diameter | 80 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.33 |
| Discard Thickness | 8.4 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Diameter | 0.5 |
| Mounting Bolt Hole Diameter | 12.6 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.39 |
| Nominal Thickness | 10 |
| Outside Diameter | 11.89 |
| Outside Diameter | 302 |
| Overall Height | 2.31 |
| Overall Height | 58.8 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Solid |
| Fits | Mitsubishi · 22 vehicles |
Cast iron construction. Full-cast rotor for dependable braking performance.
Non-directional surface. Helps simplify installation and service.
DuraGo quality. Manufactured in ISO-certified factories to meet fit, form, and function requirements.
Cross-references Parts Authority PRT5934, Raybestos Brakes 980594 and 4615A035 for the same application. See all 9.
DuraGo BR900594 Rear Disc Brake Rotor
The DuraGo BR900594 is a rear drum-in-hat disc brake rotor built from cast iron for select Mitsubishi applications. It is a solid, non-directional rotor with a full cast construction and a 5-bolt mounting pattern, made for drivers replacing worn rear brake components on Mitsubishi Lancer and Mitsubishi Outlander models.
Key Features
- Cast iron construction for dependable braking performance
- Solid, drum-in-hat rotor design for rear brake service
- Non-directional brake surface for consistent pad contact
- 5 mounting bolt holes with a 114.3 mm bolt circle diameter
- 11.89 in. outside diameter and 3.15 in. center hole diameter
- Nominal thickness: 0.39 in. (10 mm); discard thickness: 0.33 in. (8.4 mm)
- Fits rear brake applications for Mitsubishi Lancer and Mitsubishi Outlander
Detailed Description
DuraGo BR900594 is a rear disc brake rotor engineered for vehicles using a drum-in-hat rear rotor design. Its cast iron, full cast construction supports stable braking characteristics, while the solid rotor layout and non-directional surface help maintain even pad contact during routine brake service. This part number is used on 2009-2015 Mitsubishi Lancer rear applications, 2007-2013 Mitsubishi Outlander rear applications, and 2008-2011 Mitsubishi Outlander rear applications with 7 passenger seating. The BR900594 also cross-references Raybestos Brakes 980594 for the same application.
DuraGo has a long history in aftermarket brake manufacturing, and its brake drum and rotor program is built around catalog coverage, fitment accuracy, and ISO-certified production standards. For buyers searching for a rear brake rotor for Mitsubishi Lancer or a rear brake rotor for Mitsubishi Outlander, BR900594 provides a direct replacement option with the listed dimensions and mounting configuration.
Common Brake Issues This Rotor Can Address
- Rear brake pulsation caused by rotor wear or thickness variation
- Brake noise related to uneven rotor surfaces
- Reduced braking consistency from a worn rear rotor
- Service replacement for a rotor that has reached discard thickness
- Fitment replacement for rear Mitsubishi brake maintenance
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and rear fitment before installation. This rotor is a solid drum-in-hat design, so confirm the vehicle uses the same rear brake configuration. Inspect pads, caliper hardware, and hub condition during service to help ensure proper brake operation after replacement. Fits 2009-2015 Mitsubishi Lancer, rear. Fits 2007-2013 Mitsubishi Outlander, rear. Fits 2008-2011 Mitsubishi Outlander, rear, 7 passenger seating.
Quality Assurance
DuraGo manufactures brake components through ISO-certified factories and builds its rotor program to meet fit, form, and function requirements. The BR900594 is produced to support accurate replacement for the listed Mitsubishi rear brake applications.
| Year | Make | Model | Submodel | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2015 | Mitsubishi | Lancer | Ralliart | — | — | Rear | — |
| 2014 | Mitsubishi | Lancer | Ralliart | — | — | Rear | — |
| 2013 | Mitsubishi | Lancer | Ralliart | — | — | Rear | — |
| 2013 | Mitsubishi | Outlander | GT | — | — | Rear | — |
| 2013 | Mitsubishi | Outlander | SE | — | — | Rear | — |
| 2012 | Mitsubishi | Lancer | Ralliart | — | — | Rear | — |
| 2012 | Mitsubishi | Outlander | GT | — | — | Rear | — |
| 2012 | Mitsubishi | Outlander | SE | — | — | Rear | — |
| 2011 | Mitsubishi | Lancer | Ralliart | — | — | Rear | — |
| 2011 | Mitsubishi | Lancer | Ralliart Sportback | — | — | Rear | — |
| 2011 | Mitsubishi | Outlander | — | 2.4L | L4 | Rear | 7 Passenger Seating |
| 2011 | Mitsubishi | Outlander | — | 3.0L | V6 | Rear | — |
| 2010 | Mitsubishi | Lancer | Ralliart | — | — | Rear | — |
| 2010 | Mitsubishi | Lancer | Ralliart Sportback | — | — | Rear | — |
| 2010 | Mitsubishi | Outlander | — | 2.4L | L4 | Rear | 7 Passenger Seating |
| 2010 | Mitsubishi | Outlander | — | 3.0L | V6 | Rear | — |
| 2009 | Mitsubishi | Lancer | Ralliart | — | — | Rear | — |
| 2009 | Mitsubishi | Outlander | — | 2.4L | L4 | Rear | 7 Passenger Seating |
| 2009 | Mitsubishi | Outlander | — | 3.0L | V6 | Rear | — |
| 2008 | Mitsubishi | Outlander | — | 2.4L | L4 | Rear | 7 Passenger Seating |
| 2008 | Mitsubishi | Outlander | — | 3.0L | V6 | Rear | — |
| 2007 | Mitsubishi | Outlander | — | — | — | Rear | — |
| No rows match your filter. | |||||||