DuraGo BR900850 Disc Brake Rotor - Front
OE Quality 60-Day Returns
DuraGo

DuraGo BR900850 Disc Brake Rotor - Front

Brand DuraGo BR900850
Position Front
ABS Tone Ring Included No
Center Hole Diameter 2.5
Center Hole Diameter 63.6
Construction Full Cast
Conventional Or Drum-In-Hat Type Rotor Conventional
Cross Drilled No
Directional or Non-Directional Brake Surface Non-Directional
Discard Thickness 0.87
Discard Thickness 22
Material Cast Iron
Mounting Bolt Hole Circle Diameter 4.25
Mounting Bolt Hole Circle Diameter 108
Mounting Bolt Hole Diameter 0.54
Mounting Bolt Hole Diameter 13.8
Mounting Bolt Hole Quantity 5
Nominal Thickness 0.94
Nominal Thickness 24
Outside Diameter 10.94
Outside Diameter 278
Overall Height 1.75
Overall Height 44.4
Rust Resistant Coating No
Slotted No
Solid Or Vented Type Rotor Vented
Fits Ford · 4 vehicles

Cast iron construction. Full-cast rotor for dependable braking performance.

Vented design. Helps dissipate heat for more consistent stopping.

Non-directional surface. Simplifies installation and everyday service.

Cross-references Parts Authority PRT5988, Raybestos Brakes 680765 and Walker Exhaust 54172 for the same application. See all 10.

$47.07Free shipping
In stock · usually ships same day before 1pm CST
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.

Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
Step 2 — Quantity
Disc Brake Rotors are typically replaced in pairs, axle by axle.
Order total $47.07
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.
Not what you need? See all Disc Brake Rotor options

DuraGo BR900850 Front Brake Rotor

The DuraGo BR900850 is a front disc brake rotor for select Ford Transit Connect models. Built from cast iron in a full cast, vented design, it supports consistent braking performance for everyday driving and service replacement needs.

Fits 2010-2013 Ford Transit Connect, front. This rotor is a direct-fit option for Transit Connect front brake service when matching the listed OE-style dimensions and bolt pattern.

  • Cast iron construction for dependable braking surface strength
  • Full cast, vented rotor design for front axle applications
  • Non-directional brake surface for straightforward service installation
  • 5-bolt mounting pattern with 108 mm bolt circle diameter
  • Outside diameter: 278 mm (10.94 in.)
  • Center hole diameter: 63.6 mm (2.5 in.)
  • Nominal thickness: 24 mm (0.94 in.); discard thickness: 22 mm (0.87 in.)
  • Overall height: 44.4 mm (1.75 in.)

Detailed Product Overview

DuraGo BR900850 is engineered as a conventional front brake rotor for the Ford Transit Connect. The vented, full cast construction helps maintain stable rotor geometry under normal braking loads, while the non-directional surface simplifies rotor preparation during brake service. DuraGo manufactures brake drums and rotors through ISO certified factories, with attention to fit, form, and function for aftermarket replacement applications. This part cross-references Raybestos Brakes 680765 for the same application.

Use BR900850 when replacing a worn, warped, or below-spec front rotor on 2010-2013 Ford Transit Connect vehicles. The listed dimensions, 5-lug pattern, and 108 mm bolt circle help ensure proper alignment with the hub and brake assembly.

Common Problems This Rotor Can Address

  • Brake pulsation caused by rotor thickness variation or runout
  • Reduced stopping consistency from worn front rotors
  • Noise from rotor surface wear or uneven braking contact
  • Service failures tied to rotors below discard thickness
  • Fitment issues when replacing a front rotor with the wrong diameter or bolt pattern

Installation Notes and Tips

Confirm rotor diameter, center bore, bolt circle, and thickness before installation. Inspect pads, caliper hardware, and hub condition at the same time, and clean the hub mounting surface to reduce runout concerns. Because this rotor is non-directional and not cross-drilled or slotted, it installs as a conventional replacement part for front brake service on the listed Ford Transit Connect applications.

Quality Assurance

DuraGo brake rotors are produced in ISO certified factories and built to meet fit, form, and function requirements for aftermarket replacement use. The BR900850 follows DuraGo’s brake program standards for catalog accuracy and application-specific fitment.

Related reading

This part fits 4 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelPositionNotes
2013FordTransit ConnectFront—
2012FordTransit ConnectFront—
2011FordTransit ConnectFront—
2010FordTransit ConnectFront—
Directly replaces or cross-references 10 part numbers
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
Parts Authority — PRT5988Raybestos Brakes — 680765Walker Exhaust — 541722T1Z1125A9008504455980445798512165132AX900850P900850