DuraGo BR901108-01 Disc Brake Rotor - Front

Brand DuraGo BR901108-01
Position Front
Material Cast iron
Discard Thickness 1.44
Discard Thickness 36.5
Nominal Thickness 1.5
Nominal Thickness 38
Construction Full cast
Rust Resistant Coating Yes
Overall Height 3.78
Overall Height 96
Outside Diameter 14.17
Outside Diameter 360
Mounting Bolt Hole Quantity 8
ABS Tone Ring Included No
Solid Or Vented Type Rotor Vented
Center Hole Diameter 123
Center Hole Diameter 4.84
Mounting Bolt Hole Circle Diameter 165.1
Mounting Bolt Hole Circle Diameter 6.5
Mounting Bolt Hole Diameter 0.57
Mounting Bolt Hole Diameter 14.5
Directional or Non-Directional Brake Surface Non-directional
Conventional Or Drum-In-Hat Type Rotor Conventional
Cross Drilled No
Slotted No
Fits Nissan · 30 vehicles

Corrosion-resistant coating. Helps protect the hat and edge for lasting defense against rust.

Vented design. Promotes efficient airflow for consistent braking performance.

Full cast construction. Cast iron rotor built to meet fit, form, and function requirements.

Cross-references 402061PA1A and 402061PA1B for the same application. See all 2.

$97.00Free shipping
In stock · usually ships same day before 1pm CST
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.

Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
Step 2 — Quantity
Disc Brake Rotors are typically replaced in pairs, axle by axle.
Order total $97.00
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.

DuraGo Titanium Series Front Brake Rotor

The DuraGo Titanium Series brake rotor is built for front brake service on select Nissan NV vans and combines cast iron construction with a corrosion-resistant coating on the hat and edge. Part number BR901108-01 is engineered for fit, form, and function in applications that call for a vented, non-directional disc brake rotor with a titanium gray finish.

Key Features

  • Cast iron, full-cast construction for front brake replacement
  • Vented rotor design with non-directional brake surface
  • Rust-resistant coating on the hat and edge for added corrosion defense
  • Titanium gray finish for a clean appearance behind open wheel designs
  • Outside diameter: 14.17 in. (360 mm)
  • Nominal thickness: 1.50 in. (38 mm); discard thickness: 1.44 in. (36.5 mm)
  • Overall height: 3.78 in. (96 mm)
  • 8 mounting bolt holes, 6.5 in. bolt circle diameter
  • Center hole diameter: 4.84 in. (123 mm)

Detailed Description

DuraGo BR901108-01 is a front disc brake rotor for 2012-2021 Nissan NV1500, 2012-2021 Nissan NV2500, and 2012-2021 Nissan NV3500. It uses a vented, conventional rotor design with a non-directional friction surface to support consistent brake service and straightforward installation. The corrosion-resistant coating helps protect the hat and edge from rust, which is especially useful on work vans exposed to road moisture and winter conditions. This part cross-references Nissan OE numbers 402061PA1A and 402061PA1B for the same application.

Common Repair Uses

  • Front brake pulsation caused by rotor wear or thickness variation
  • Rust buildup on the rotor hat and outer edge
  • Brake noise related to worn or heat-affected rotor surfaces
  • Reduced braking performance from a rotor at or near discard thickness
  • Service replacement on Nissan NV1500, NV2500, or NV3500 front brake systems

Installation Notes and Tips

Verify rotor diameter, center hole, bolt pattern, and thickness before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake pulsation. Inspect pads, calipers, and hardware condition during rotor replacement, and follow the vehicle service manual for torque and bedding procedures. Fits 2012-2021 Nissan NV1500, front; fits 2012-2021 Nissan NV2500, front; fits 2012-2021 Nissan NV3500, front.

Quality Assurance

DuraGo manufactures DTS rotors in an ISO-certified factory to meet fit, form, and function requirements. The Titanium Series is backed by DuraGo’s two decades of brake component experience and is built for professional-grade service on Nissan NV front brake applications.

This part fits 30 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelPositionNotes
2021NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2021NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2021NissanNV3500FrontCoated Hat and Edge for Rust Resistance
2020NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2020NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2020NissanNV3500FrontCoated Hat and Edge for Rust Resistance
2019NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2019NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2019NissanNV3500FrontCoated Hat and Edge for Rust Resistance
2018NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2018NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2018NissanNV3500FrontCoated Hat and Edge for Rust Resistance
2017NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2017NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2017NissanNV3500FrontCoated Hat and Edge for Rust Resistance
2016NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2016NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2016NissanNV3500FrontCoated Hat and Edge for Rust Resistance
2015NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2015NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2015NissanNV3500FrontCoated Hat and Edge for Rust Resistance
2014NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2014NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2014NissanNV3500FrontCoated Hat and Edge for Rust Resistance
2013NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2013NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2013NissanNV3500FrontCoated Hat and Edge for Rust Resistance
2012NissanNV1500FrontCoated Hat and Edge for Rust Resistance
2012NissanNV2500FrontCoated Hat and Edge for Rust Resistance
2012NissanNV3500FrontCoated Hat and Edge for Rust Resistance
Directly replaces or cross-references 2 part numbers
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
402061PA1A402061PA1B