DuraGo BR901130 Disc Brake Rotor - Front or Rear

Reliable DuraGo BR901130 Disc Brake Rotor Overview

The DuraGo BR901130 is a vented disc brake rotor designed for vehicles requiring durable and consistent braking performance. Crafted from full cast iron, this rotor offers reliable heat dissipation and structural integrity for a variety of automotive applications.

• Material: Full cast iron construction for strength and durability
• Vented design to improve heat dissipation and reduce brake fade
• Nominal thickness of 1.44 inches (36.5 mm) with discard thickness at 1.32 inches (33.53 mm)
• Overall height of 3.4 inches (86.3 mm) and outside diameter of 15.39 inches (390.8 mm)
• 10 mounting bolt holes with a bolt circle diameter of 7.25 inches (184.15 mm)
• Non-directional brake surface suitable for various vehicle configurations
• Conventional rotor type without cross-drilled or slotted features

Detailed Product Description and Specifications

The DuraGo BR901130 disc brake rotor is engineered with a full cast iron construction, providing a solid and durable braking surface. Its vented design enhances airflow between the rotor surfaces, which helps maintain optimal operating temperatures and reduces the risk of brake fade during extended use. The rotor measures 15.39 inches (390.8 mm) in outside diameter and has an overall height of 3.4 inches (86.3 mm), making it compatible with a range of mid to large-sized vehicles.

This rotor features 10 mounting bolt holes with a bolt circle diameter of 7.25 inches (184.15 mm) and a center hole diameter of 6 inches (152.5 mm), ensuring precise fitment. The nominal thickness is 1.44 inches (36.5 mm), with a discard thickness of 1.32 inches (33.53 mm), indicating when the rotor should be replaced to maintain safe braking performance. The brake surface is non-directional, allowing for flexible installation without concern for rotor orientation.

Common Applications and Problem Solving

• Replacement for worn or warped rotors causing brake pulsation or noise
• Upgrading from solid to vented rotors for improved heat management
• Addressing rotor thickness below manufacturer specifications to restore braking efficiency
• Resolving uneven brake pad wear due to rotor surface irregularities
• Suitable for vehicles requiring a 10-bolt mounting pattern with 15.39-inch diameter rotors

Installation Notes and Tips

• Verify rotor dimensions and bolt pattern compatibility with your vehicle before installation
• Ensure the rotor surface is clean and free of contaminants prior to mounting
• Torque mounting bolts to manufacturer specifications to avoid rotor warping
• Check brake pads for wear and replace if necessary to ensure optimal rotor performance
• Perform a proper bed-in procedure after installation to maximize braking efficiency

Quality Assurance and Warranty Information

DuraGo manufactures the BR901130 rotor to meet or exceed industry standards for durability and performance. While specific warranty details are not provided, DuraGo products typically come with a limited warranty against defects in materials and workmanship. It is recommended to consult the product documentation or contact the manufacturer for precise warranty coverage.