DuraGo BR901186 Disc Brake Rotor - Front

DuraGo BR901186 Front Brake Rotor

The DuraGo BR901186 is a vented front disc brake rotor built from cast iron for direct replacement service on select Honda and Acura applications. It is a conventional, non-directional rotor with a full cast construction and a 5-lug bolt pattern for straightforward brake service.

Compatible with 2013-2017 Honda Accord front, 2016 Honda CR-Z front, and 2013 Acura ILX front, this rotor supports common front brake repair needs where rotor wear, pulsation, or surface damage has affected braking performance. The BR901186 is manufactured in ISO-certified factories to meet fit, form, and function requirements.

Key Features

• Part number BR901186
• Cast iron, full cast construction
• Vented conventional disc brake rotor
• Non-directional brake surface
• 5 mounting bolt holes with 114.3 mm bolt circle diameter
• Outside diameter: 11.09 in. (281.8 mm)
• Nominal thickness: 0.91 in. (23 mm)
• Discard thickness: 0.83 in. (21 mm)
• Center hole diameter: 2.53 in. (64.2 mm)
• No cross-drilling, no slots, no ABS tone ring

Detailed Description

DuraGo brake rotors are developed for professional repair use, with catalog coverage and application matching focused on common aftermarket needs. The BR901186 follows a conventional rotor design and uses a vented cast iron structure to support front axle braking on the listed Honda Accord, Honda CR-Z, and Acura ILX applications. Its non-directional surface helps simplify installation and service replacement.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. For shoppers searching for a front brake rotor for 2013-2017 Honda Accord, a front rotor for 2016 Honda CR-Z, or a front brake rotor for 2013 Acura ILX, BR901186 is the direct part number to reference.

Common Brake Issues It Can Address

• Brake pedal pulsation caused by rotor wear or thickness variation
• Visible scoring, grooves, or heat spotting on the braking surface
• Reduced braking smoothness during front brake service
• Rotor replacement needs after pad wear or brake inspection
• Noise or vibration traced to a worn front disc rotor

Installation Notes and Tips

Verify rotor diameter, center hole, and bolt pattern before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake pulsation, and inspect pads, calipers, and hardware condition during rotor replacement. Always confirm the vehicle’s front brake application before ordering BR901186.

Quality Assurance

DuraGo has more than 45 years of aftermarket manufacturing experience, and its brake drum and rotor program is built for professional cataloging and application coverage. BR901186 is produced by ISO-certified factories to meet fit, form, and function requirements.