DuraGo BR901204 Disc Brake Rotor - Front

DuraGo BR901204 Front Brake Rotor

The DuraGo BR901204 is a front disc brake rotor built from cast iron with a full cast construction and a vented design for applications that require consistent braking performance. It is cataloged for a wide range of Nissan and INFINITI front axle fitments, including the Nissan Z, Murano, Pathfinder, and INFINITI Q50, Q60, QX50, and QX60.

Key Features

• Cast iron construction with full cast rotor design
• Vented front rotor for heat management in everyday braking use
• Outside diameter: 12.6 in. / 320 mm
• Nominal thickness: 1.1 in. / 28 mm
• Discard thickness: 1.02 in. / 26 mm
• Overall height: 1.94 in. / 49.3 mm
• 5-bolt mounting pattern with 114.3 mm bolt circle
• Center hole diameter: 2.68 in. / 68 mm
• Non-directional brake surface for straightforward pad contact
• Conventional rotor design; not cross-drilled or slotted

Detailed Description

DuraGo BR901204 is a conventional front brake rotor engineered for direct-fit applications across multiple Nissan and INFINITI platforms. It uses a vented, full cast iron design with a non-directional braking surface, which supports even pad contact and predictable service replacement on vehicles such as the 2014-2024 INFINITI Q50, 2015-2024 Nissan Murano, and 2017-2022 INFINITI Q60. This part number, BR901204, also cross-references Parts Authority PRT6232 for the same application.

DuraGo has a long history in the aftermarket and manufactures brake drums and rotors through ISO-certified factories focused on fit, form, and function. For buyers searching for a front brake rotor for Nissan Pathfinder, INFINITI QX60, or Nissan Z applications, BR901204 provides the dimensional and mounting specifications needed for proper replacement selection.

What This Rotor Helps Address

• Brake pulsation caused by a worn or below-spec front rotor
• Reduced braking consistency from rotor wear over time
• Service replacement needs on front brake systems for Nissan and INFINITI vehicles
• Rotor replacement after thickness reaches discard limits
• Fitment matching for 5-lug front brake applications with a 320 mm rotor diameter

Installation Notes and Tips

Verify rotor diameter, center hole size, bolt circle, and thickness before installation. This rotor is for front position applications only and is not drilled or slotted. Confirm vehicle-specific notes before ordering, including the 2018 INFINITI Q50 except Performance Package and the 2016 Nissan Pathfinder with 320 mm rotor diameter to 11/15. Always inspect pads, calipers, and hub surfaces during brake service.

Quality Assurance

DuraGo manufactures this rotor in ISO-certified factories and builds its brake program around catalog accuracy and OE-style fitment requirements. The BR901204 is produced to meet fit, form, and function expectations for the listed Nissan and INFINITI front brake applications.