/live/media/PR/PR_BR901452_Fro.jpg)
DuraGo BR901452 Disc Brake Rotor - Front
| Brand | DuraGo BR901452 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Center Hole Diameter | 2.52 |
| Center Hole Diameter | 64 |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Discard Thickness | 0.61 |
| Discard Thickness | 15.4 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 3.94 |
| Mounting Bolt Hole Circle Diameter | 100 |
| Mounting Bolt Hole Diameter | 0.5 |
| Mounting Bolt Hole Diameter | 12.7 |
| Mounting Bolt Hole Quantity | 4 |
| Nominal Thickness | 0.68 |
| Nominal Thickness | 17.2 |
| Outside Diameter | 9.04 |
| Outside Diameter | 229.5 |
| Overall Height | 1.65 |
| Overall Height | 41.8 |
| Rust Resistant Coating | No |
| Slotted | No |
| Solid Or Vented Type Rotor | Vented |
| Fits | Mitsubishi · 3 vehicles |
Vented design. Helps promote airflow for more consistent braking performance.
Full cast construction. Cast iron rotor built for dependable strength and durability.
Conventional rotor. A straightforward brake rotor for standard replacement needs.
Cross-references 4615A105 for the same application. See all 1.
DuraGo BR901452 Front Brake Rotor
The DuraGo BR901452 is a front disc brake rotor for 2014-2016 Mitsubishi Mirage applications. Built from cast iron with a vented, full-cast construction, it provides the correct fitment and braking surface geometry for routine rotor replacement on the Mitsubishi Mirage front axle.
Key Features
- Cast iron construction for dependable braking performance
- Vented, conventional disc brake rotor design
- Non-directional brake surface for straightforward service preparation
- 4-bolt mounting pattern with 100 mm bolt circle diameter
- Outside diameter: 229.5 mm (9.04 in.)
- Center hole diameter: 64 mm (2.52 in.)
- Nominal thickness: 17.2 mm (0.68 in.); discard thickness: 15.4 mm (0.61 in.)
- Fits 2014-2016 Mitsubishi Mirage, front
Detailed Description
DuraGo BR901452 is a conventional front brake rotor engineered for the Mitsubishi Mirage front brake system. Its vented full-cast design supports heat dissipation during repeated stops, while the non-directional surface helps simplify rotor preparation during brake service. The rotor measures 229.5 mm in outside diameter, 64 mm at the center hole, and uses a 4-bolt pattern with a 100 mm bolt circle, matching the listed Mirage front fitment for 2014-2016 model years. This part cross-references Monroe Shocks & Struts (e.g., 4615A105) for the same application.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotor surfaces
- Reduced stopping consistency from rotor wear beyond discard thickness
- Noise caused by damaged or heat-affected front rotors
- Service issues when replacing a rotor on a 2014-2016 Mitsubishi Mirage front brake setup
- Fitment problems from using the wrong bolt pattern or center bore size
Installation Notes and Tips
Verify rotor thickness, hub condition, and mounting surface cleanliness before installation. Confirm the rotor matches the front position on the 2014-2016 Mitsubishi Mirage and check that the 4-bolt, 100 mm bolt circle and 64 mm center hole align with the vehicle hub. Always inspect pads, caliper hardware, and wheel bearings during brake service to help ensure even rotor wear and proper braking feel.
Quality Assurance
DuraGo has over 45 years of aftermarket manufacturing experience, and its brake drum and rotor program is built for professional cataloging and application coverage. Products are manufactured by ISO-certified factories to meet fit, form, and function requirements.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2016 | Mitsubishi | Mirage | Front | — |
| 2015 | Mitsubishi | Mirage | Front | — |
| 2014 | Mitsubishi | Mirage | Front | — |
| No rows match your filter. | ||||