DuraGo BR901592-02 Disc Brake Rotor - Front

Overview of DuraGo BR901592-02 Disc Brake Rotor

The DuraGo BR901592-02 is a cast iron vented disc brake rotor designed for reliable braking performance. Engineered for select Lexus and Toyota models, this rotor offers durability and consistent stopping power with a rust-resistant coating to extend service life.

• Material: Full cast iron construction for strength and heat dissipation
• Vented rotor design to improve cooling and reduce brake fade
• Rust-resistant coating to protect against corrosion
• Nominal thickness of 1.1 inches (28 mm) with discard thickness at 0.98 inches (25 mm)
• Outside diameter of 12.91 inches (328 mm) suitable for specific Lexus and Toyota vehicles
• Five mounting bolt holes with a 4.5 inch (114.3 mm) bolt circle diameter
• Non-directional brake surface for flexible installation

Detailed Product Description

The DuraGo BR901592-02 disc brake rotor is constructed from full cast iron, providing a balance of durability and effective heat management. Its vented design allows air to circulate between the rotor surfaces, helping to dissipate heat generated during braking and reducing the risk of brake fade. The rotor features a rust-resistant coating that helps maintain its appearance and structural integrity over time, especially in environments prone to moisture and road salt.

With a nominal thickness of 1.1 inches (28 mm) and a discard thickness of 0.98 inches (25 mm), this rotor meets the specifications required for safe and effective braking. The overall height measures 1.94 inches (49.4 mm), and the outside diameter is 12.91 inches (328 mm), making it compatible with a range of Lexus and Toyota models including Avalon, bZ, Camry, Crown Signia, NX250, NX350, NX350h, RX350, RX350L, RX450h, and RX450hL. The rotor includes five mounting bolt holes with a 4.5 inch (114.3 mm) bolt circle diameter and 0.57 inch (14.5 mm) bolt hole diameter, ensuring proper fitment and secure installation.

Compatible Vehicles and Applications

This DuraGo disc brake rotor is compatible with the following makes and models:

• Lexus Avalon, bZ, Camry, Crown Signia
• Lexus NX250, NX350, NX350h
• Lexus RX350, RX350L, RX450h, RX450hL

It is designed for use as a conventional, non-directional rotor without cross-drilling or slotting, suitable for drivers seeking a direct replacement part that meets OEM specifications.

Common Issues Addressed by This Rotor

• Brake rotor warping causing vibration during braking
• Excessive brake noise or squealing
• Reduced braking performance due to worn or thin rotors
• Corrosion and rust buildup affecting rotor surface
• Overheating and brake fade during extended use

Installation Notes and Tips

• Ensure rotor thickness is above discard thickness before installation
• Clean mounting surface to prevent uneven rotor seating
• Torque mounting bolts to manufacturer specifications
• Inspect brake pads and replace if worn to ensure optimal rotor performance
• Perform a bed-in procedure after installation for consistent braking

Quality Assurance and Warranty

DuraGo manufactures this rotor to meet industry standards for material quality and dimensional accuracy. The rust-resistant coating enhances durability in various driving conditions. While specific warranty details may vary, DuraGo typically offers limited warranties covering defects in materials and workmanship. Refer to the product documentation for exact warranty terms.