/live/media/PR/PR_BR90178801_Fro.jpg)
DuraGo BR901788-01 Disc Brake Rotor - Front
| Brand | DuraGo BR901788-01 |
|---|---|
| Position | Front |
| Material | Cast iron |
| Discard Thickness | 1.12 |
| Discard Thickness | 28.4 |
| Nominal Thickness | 1.19 |
| Nominal Thickness | 30.2 |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 1.98 |
| Overall Height | 50.4 |
| Outside Diameter | 13.39 |
| Outside Diameter | 340 |
| Mounting Bolt Hole Quantity | 5 |
| ABS Tone Ring Included | No |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 2.72 |
| Center Hole Diameter | 69 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Diameter | 0.49 |
| Mounting Bolt Hole Diameter | 12.5 |
| Directional or Non-Directional Brake Surface | Non-directional |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Slotted | No |
| Fits | Hyundai and Kia · 12 vehicles |
Corrosion-resistant coating. Protects the hat and edge for lasting defense against rust.
Vented design. Helps air flow through the rotor for more efficient cooling.
ISO-certified manufacturing. Built to meet fit, form, and function requirements.
Cross-references 51712B8000 and 51712S9000 for the same application. See all 2.
DuraGo Titanium Series Front Brake Rotor
The DuraGo Titanium Series brake rotor is built for front brake service on select Hyundai Palisade and Kia Telluride models. Part number BR901788-01 combines a cast iron full-cast construction with a corrosion-resistant coating on the hat and edge for added protection in exposed wheel applications.
Manufactured in an ISO-certified factory, this vented rotor is engineered to meet fit, form, and function requirements for direct replacement service. The titanium gray finish also provides a cleaner appearance behind open wheel designs.
Key Features
- Part number BR901788-01
- Front disc brake rotor for select Hyundai Palisade and Kia Telluride applications
- Cast iron, full-cast construction
- Vented rotor design for front brake use
- Rust-resistant coating on the hat and edge
- Titanium gray finish for improved appearance behind open wheels
- Non-directional brake surface
- 5-bolt mounting pattern with 114.3 mm bolt circle
- Outside diameter: 340 mm (13.39 in.)
- Nominal thickness: 30.2 mm (1.19 in.)
- Discard thickness: 28.4 mm (1.12 in.)
Detailed Description
DuraGo BR901788-01 is a front brake rotor engineered for 2020-2025 Hyundai Palisade and 2020-2025 Kia Telluride models. It uses a vented, full-cast cast iron design with a non-directional braking surface to support consistent pad contact and straightforward service replacement. The corrosion-resistant coating helps protect the hat and edge from rust, while the titanium gray finish adds a clean look on vehicles with open wheel designs. This rotor is manufactured to meet fit, form, and function requirements in an ISO-certified facility and reflects DuraGo’s long-term brake component development experience.
This part cross-references OE-style part numbers 51712B8000 and 51712S9000 for the same application.
What This Rotor Helps Address
- Front brake pulsation caused by worn rotor surfaces
- Brake noise related to uneven rotor wear
- Rust buildup on exposed rotor hat and edge areas
- Reduced braking consistency from rotor thickness wear
- Service replacement needs on Hyundai Palisade and Kia Telluride front brakes
Installation Notes and Tips
Fits 2020-2025 Hyundai Palisade, front. Fits 2020-2025 Kia Telluride, front. Verify rotor dimensions, bolt pattern, and center bore before installation. Inspect pads, calipers, and hub surfaces during brake service to help ensure proper rotor seating and braking performance. Confirm the rotor meets the vehicle’s front axle specification before installation.
Quality Assurance
DuraGo manufactures this rotor in an ISO-certified factory and builds it to meet fit, form, and function requirements. The Titanium Series coating is applied for corrosion resistance on the hat and edge, supporting long-term appearance and protection in normal brake service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2025 | Hyundai | Palisade | Front | Coated Hat and Edge for Rust Resistance |
| 2025 | Kia | Telluride | Front | Coated Hat and Edge for Rust Resistance |
| 2024 | Hyundai | Palisade | Front | Coated Hat and Edge for Rust Resistance |
| 2024 | Kia | Telluride | Front | Coated Hat and Edge for Rust Resistance |
| 2023 | Hyundai | Palisade | Front | Coated Hat and Edge for Rust Resistance |
| 2023 | Kia | Telluride | Front | Coated Hat and Edge for Rust Resistance |
| 2022 | Hyundai | Palisade | Front | Coated Hat and Edge for Rust Resistance |
| 2022 | Kia | Telluride | Front | Coated Hat and Edge for Rust Resistance |
| 2021 | Hyundai | Palisade | Front | Coated Hat and Edge for Rust Resistance |
| 2021 | Kia | Telluride | Front | Coated Hat and Edge for Rust Resistance |
| 2020 | Hyundai | Palisade | Front | Coated Hat and Edge for Rust Resistance |
| 2020 | Kia | Telluride | Front | Coated Hat and Edge for Rust Resistance |
| No rows match your filter. | ||||