/live/media/PR/PR_BR90181001_Fro.jpg)
DuraGo BR901810-01 Disc Brake Rotor - Front
| Brand | DuraGo BR901810-01 |
|---|---|
| Position | Front |
| Material | Cast iron |
| Discard Thickness | 0.91 |
| Discard Thickness | 23 |
| Nominal Thickness | 0.98 |
| Nominal Thickness | 25 |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 1.83 |
| Overall Height | 46.5 |
| Outside Diameter | 11.61 |
| Outside Diameter | 295 |
| Mounting Bolt Hole Quantity | 5 |
| ABS Tone Ring Included | No |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 2.68 |
| Center Hole Diameter | 68 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Diameter | 0.52 |
| Mounting Bolt Hole Diameter | 13.3 |
| Directional or Non-Directional Brake Surface | Non-directional |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Slotted | No |
| Fits | Mazda · 13 vehicles |
Corrosion-resistant coating. Helps protect the rotor hat and edge from rust.
Vented design. Promotes efficient airflow for consistent braking performance.
Full cast construction. Made from cast iron for dependable rotor strength.
Cross-references BDWK33251 and BEET33251 for the same application. See all 2.
DuraGo BR901810-01 Front Brake Rotor
The DuraGo Titanium Series BR901810-01 is a front disc brake rotor built from cast iron with a vented, full-cast construction. It features a corrosion-resistant coating on the hat and edge, plus a titanium gray finish that suits open-wheel vehicle designs.
Key Features
- Part number: BR901810-01
- Front disc brake rotor for confirmed Mazda fitments
- Cast iron, full-cast construction
- Vented rotor design for front brake applications
- Rust-resistant coating on the hat and edge
- Non-directional brake surface
- 5-bolt mounting pattern with 114.3 mm bolt circle
- 295 mm outside diameter, 25 mm nominal thickness, 23 mm discard thickness
- 68 mm center hole diameter
Detailed Description
DuraGo BR901810-01 is engineered for front brake service on 2019-2026 Mazda 3, 2019 and 2021-2025 Mazda 3 Sport, and 2020-2025 Mazda CX-30. The vented rotor design supports front axle braking demands, while the corrosion-resistant coating helps protect the hat and edge from rust. Manufactured in an ISO certified factory, this rotor is built to meet fit, form, and function requirements for the listed applications. This part cross-references Monroe Shocks & Struts (e.g., BDWK33251, BEET33251) for the same application.
What This Rotor Helps Address
- Brake pulsation from a worn or uneven rotor surface
- Reduced braking consistency on front axle applications
- Visible rust on the rotor hat and outer edge
- Fitment issues when replacing the original front rotor on Mazda 3, Mazda 3 Sport, or Mazda CX-30
- Noise or vibration caused by rotor wear beyond discard thickness
Installation Notes and Tips
Verify rotor dimensions before installation, including outside diameter, center hole diameter, bolt circle, and nominal thickness. Confirm the vehicle is one of the listed front applications: Fits 2019-2026 Mazda 3, front; Fits 2019 Mazda 3 Sport, front; Fits 2021-2025 Mazda 3 Sport, front; Fits 2020-2025 Mazda CX-30, front. Inspect pads, caliper hardware, and hub condition during rotor replacement, and clean the hub mounting surface to support proper rotor seating.
Quality Assurance
DuraGo manufactures this Titanium Series rotor in an ISO certified factory and applies a corrosion-resistant coating for added protection at the hat and edge. The BR901810-01 is engineered using DuraGo’s experience in brake components to meet application-specific fit, form, and function requirements.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2025 | Mazda | 3 | AWD | Front | Coated Hat and Edge for Rust Resistance |
| 2025 | Mazda | CX-30 | — | Front | Coated Hat and Edge for Rust Resistance |
| 2024 | Mazda | 3 | AWD | Front | Coated Hat and Edge for Rust Resistance |
| 2024 | Mazda | CX-30 | — | Front | Coated Hat and Edge for Rust Resistance |
| 2023 | Mazda | 3 | AWD | Front | Coated Hat and Edge for Rust Resistance |
| 2023 | Mazda | CX-30 | — | Front | Coated Hat and Edge for Rust Resistance |
| 2022 | Mazda | 3 | AWD | Front | Coated Hat and Edge for Rust Resistance |
| 2022 | Mazda | CX-30 | — | Front | Coated Hat and Edge for Rust Resistance |
| 2021 | Mazda | 3 | AWD | Front | Coated Hat and Edge for Rust Resistance |
| 2021 | Mazda | CX-30 | — | Front | Coated Hat and Edge for Rust Resistance |
| 2020 | Mazda | 3 | AWD | Front | Coated Hat and Edge for Rust Resistance |
| 2020 | Mazda | CX-30 | — | Front | Coated Hat and Edge for Rust Resistance |
| 2019 | Mazda | 3 | AWD | Front | Coated Hat and Edge for Rust Resistance |
| No rows match your filter. | |||||