DuraGo BR901976 Disc Brake Rotor - Front

DuraGo BR901976 Front Disc Brake Rotor

The DuraGo BR901976 is a front vented disc brake rotor built from cast iron for direct replacement service on select Ford and Lincoln applications. It is sized for 350 mm rotor diameter fitment and is engineered for conventional brake systems that require a non-directional braking surface.

Compatible With 2021-2024 Ford Edge, front and 2021-2024 Lincoln Nautilus, front, this rotor supports OE-style brake service where correct diameter, bolt pattern, and center bore are critical. The BR901976 is a practical choice for drivers and technicians replacing a worn front rotor on these vehicles.

Key Features

• Part number: BR901976
• Cast iron, full cast construction
• Vented front disc brake rotor
• 350 mm outside diameter
• 5-bolt mounting pattern
• Non-directional brake surface
• Conventional rotor design
• No cross-drilling or slotting
• No ABS tone ring included

Detailed Product Overview

DuraGo manufactures aftermarket brake components through ISO-certified factories with a focus on fit, form, and function. The BR901976 follows that approach with a 13.78-inch outside diameter, 2.5-inch center hole diameter, 108 mm bolt circle, and 0.62-inch mounting bolt hole diameter. Its 1.26-inch nominal thickness and 1.2-inch discard thickness support proper rotor service measurements during brake inspection.

For Ford Edge and Lincoln Nautilus front brake repair, the BR901976 provides the dimensional match needed for a conventional vented rotor application. The part number BR901976 is also referenced for service cataloging and replacement lookup when ordering a front rotor for these vehicles.

This part cross-references Monroe Shocks & Struts (e.g., M2GZ1125A) for the same application.

Common Problems This Rotor Helps Address

• Front brake pulsation from rotor wear or thickness variation
• Brake noise caused by a worn or uneven rotor surface
• Reduced braking consistency from heat-stressed front rotors
• Service replacement for a rotor that has reached discard thickness
• Brake repair on vehicles requiring a 350 mm front rotor

Installation Notes and Fitment Tips

Fits 2021-2024 Ford Edge, front. Fits 2021-2024 Lincoln Nautilus, front. Confirm rotor diameter, bolt circle, center hole diameter, and discard thickness before installation. Clean the hub mounting surface thoroughly and inspect pads, caliper hardware, and wheel bearings during brake service to help maintain even rotor contact.

Because this rotor is non-directional and conventional in design, it is intended for standard front brake replacement procedures on the listed applications. Verify that the vehicle requires a 350 mm rotor diameter before ordering BR901976.

Quality Assurance

DuraGo has over 45 years of aftermarket manufacturing experience, and its brake drum and rotor program is built for professional cataloging and application accuracy. The BR901976 is produced in ISO-certified factories to meet fit, form, and function requirements for the listed Ford and Lincoln front brake applications.