/live/media/PR/PR_BR901994_Fro.jpg)
DuraGo BR901994 Disc Brake Rotor - Front
| Brand | DuraGo BR901994 |
|---|---|
| Position | Front |
| Material | Cast iron |
| Discard Thickness | 1.1 |
| Discard Thickness | 28 |
| Nominal Thickness | 1.18 |
| Nominal Thickness | 30 |
| Construction | Full cast |
| Rust Resistant Coating | No |
| Overall Height | 1.9 |
| Overall Height | 48.3 |
| Outside Diameter | 12.8 |
| Outside Diameter | 325 |
| Mounting Bolt Hole Quantity | 5 |
| ABS Tone Ring Included | No |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 2.72 |
| Center Hole Diameter | 69 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Diameter | 0.5 |
| Mounting Bolt Hole Diameter | 12.6 |
| Directional or Non-Directional Brake Surface | Non-directional |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Slotted | No |
| Fits | Kia · 4 vehicles |
Cast iron construction. Full-cast design delivers dependable braking performance.
Vented rotor. Helps air flow through the rotor for more consistent cooling.
Conventional design. A straightforward brake rotor built for standard replacement needs.
Cross-references 51712R0050 for the same application. See all 1.
DuraGo BR901994 Front Disc Brake Rotor
The DuraGo BR901994 is a front vented disc brake rotor built from cast iron for the 2022-2026 Kia Carnival. It is a conventional, full cast rotor with a non-directional brake surface, made to match the fit, form, and function requirements expected in everyday brake service.
Key Features
- Fits 2022-2026 Kia Carnival, front
- Part number BR901994
- Cast iron, full cast construction
- Vented rotor design for front brake applications
- Non-directional brake surface for straightforward service prep
- Conventional rotor design with 5 mounting bolt holes
- Outside diameter: 12.8 in. (325 mm)
- Center hole diameter: 2.72 in. (69 mm)
- Mounting bolt circle diameter: 4.5 in. (114.3 mm)
- Nominal thickness: 1.18 in. (30 mm); discard thickness: 1.1 in. (28 mm)
Detailed Description
DuraGo has spent more than 45 years developing aftermarket brake components, and the BR901994 rotor reflects that catalog-focused approach to coverage and fitment. Manufactured in ISO certified factories, this front rotor is built for the 2022-2026 Kia Carnival and follows the dimensional requirements needed for proper brake service on the front axle. The vented, conventional design supports heat management in normal braking use, while the cast iron construction provides the mass and stability expected from a replacement disc brake rotor. This part cross-references Monroe Shocks & Struts (e.g., 51712R0050) for the same application.
What This Rotor Helps Address
- Front brake pulsation caused by a worn or uneven rotor surface
- Brake noise related to rotor wear or surface irregularity
- Reduced braking consistency from a rotor that has reached discard thickness
- Service needs on a 2022-2026 Kia Carnival front brake repair
- Replacement of a conventional vented rotor with matching OE-style dimensions
Installation Notes and Tips
Confirm rotor dimensions, bolt pattern, and center bore before installation on the Kia Carnival. Clean the hub mounting surface thoroughly to help prevent lateral runout, and inspect pads, calipers, and hardware condition during brake service. Measure rotor thickness after installation and follow the vehicle manufacturer’s brake service procedures.
Quality Assurance
DuraGo manufactures brake drums and rotors through ISO certified factories and builds this rotor to meet fit, form, and function requirements for the listed application. The BR901994 is supported by DuraGo’s long-running aftermarket brake program and its focus on catalog accuracy and application coverage.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2025 | Kia | Carnival | Front | — |
| 2024 | Kia | Carnival | Front | — |
| 2023 | Kia | Carnival | Front | — |
| 2022 | Kia | Carnival | Front | — |
| No rows match your filter. | ||||