/live/media/PR/PR_BR90201601_Fro.jpg)
DuraGo BR902016-01 Disc Brake Rotor - Front
| Brand | DuraGo BR902016-01 |
|---|---|
| Position | Front |
| Material | Cast iron |
| Discard Thickness | 0.98 |
| Discard Thickness | 25 |
| Nominal Thickness | 1.1 |
| Nominal Thickness | 28 |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 3.28 |
| Overall Height | 83.3 |
| Outside Diameter | 12.56 |
| Outside Diameter | 319 |
| Mounting Bolt Hole Quantity | 6 |
| ABS Tone Ring Included | No |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 3.82 |
| Center Hole Diameter | 97 |
| Mounting Bolt Hole Circle Diameter | 139.7 |
| Mounting Bolt Hole Circle Diameter | 5.5 |
| Mounting Bolt Hole Diameter | 0.65 |
| Mounting Bolt Hole Diameter | 16.5 |
| Directional or Non-Directional Brake Surface | Non-directional |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Slotted | No |
| Fits | Toyota · 2 vehicles |
Corrosion-resistant coating. Protects the rotor hat and edge for lasting defense against rust.
Vented design. Helps air flow through the rotor for more efficient cooling.
Full cast construction. Cast iron rotor built to meet fit, form, and function requirements.
Cross-references 4351204070 for the same application. See all 1.
DuraGo BR902016-01 Front Brake Rotor
The DuraGo Titanium Series BR902016-01 is a front disc brake rotor built from cast iron with a vented, full-cast construction. It features a corrosion-resistant coating on the hat and edge, plus a titanium gray finish that suits open-wheel vehicle styling.
Key Features
- Cast iron, vented front disc brake rotor
- Rust-resistant coating on the hat and edge
- Non-directional brake surface for consistent serviceability
- Full-cast construction for OE-style fit, form, and function
- Outside diameter: 12.56 in. (319 mm)
- Mounting bolt hole quantity: 6; center hole diameter: 3.82 in. (97 mm)
- Nominal thickness: 1.1 in. (28 mm); discard thickness: 0.98 in. (25 mm)
Detailed Description
DuraGo BR902016-01 is engineered for front brake service on the 2024-2026 Toyota Tacoma. It is manufactured in an ISO-certified factory and built to meet fit, form, and function requirements for direct replacement use. The coated hat and edge help protect exposed surfaces from corrosion, while the vented design supports heat management during repeated braking. This part cross-references Toyota 4351204070 for the same application.
What It Helps Address
- Front brake pulsation caused by worn rotor surfaces
- Corrosion on the rotor hat and outer edge
- Brake noise related to uneven rotor wear
- Reduced braking consistency from heat buildup
- Service replacement for a worn front rotor on a Toyota Tacoma
Installation Notes and Tips
Fits 2024-2025 Toyota Tacoma, front. Fits 2026 Toyota Tacoma, front. Confirm rotor diameter, bolt pattern, and center bore before installation. Inspect pads, caliper hardware, and hub condition during brake service, and clean the hub mounting surface to help prevent runout-related issues. The non-directional surface simplifies installation and future service.
Quality Assurance
DuraGo manufactures this rotor in an ISO-certified facility and applies its Titanium Series corrosion-resistant coating for added protection on exposed surfaces. The BR902016-01 is built using DuraGo’s brake component experience and is intended to meet OE-style fitment requirements for the listed Toyota Tacoma applications.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2025 | Toyota | Tacoma | SR | Front | Coated Hat and Edge for Rust Resistance |
| 2024 | Toyota | Tacoma | SR | Front | Coated Hat and Edge for Rust Resistance |
| No rows match your filter. | |||||