/live/media/PR/PR_BR902044_FRO.JPG)
DuraGo BR902044 Disc Brake Rotor - Front
| Brand | DuraGo BR902044 |
|---|---|
| Position | Front |
| Material | Cast iron |
| Discard Thickness | 0.87 |
| Discard Thickness | 22 |
| Nominal Thickness | 0.94 |
| Nominal Thickness | 24 |
| Construction | Full cast |
| Rust Resistant Coating | No |
| Overall Height | 1.9 |
| Overall Height | 48.2 |
| Outside Diameter | 11.56 |
| Outside Diameter | 293.5 |
| Mounting Bolt Hole Quantity | 5 |
| ABS Tone Ring Included | No |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 2.28 |
| Center Hole Diameter | 58 |
| Mounting Bolt Hole Circle Diameter | 114.3 |
| Mounting Bolt Hole Circle Diameter | 4.5 |
| Mounting Bolt Hole Diameter | 0.51 |
| Mounting Bolt Hole Diameter | 13 |
| Directional or Non-Directional Brake Surface | Non-directional |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Cross Drilled | No |
| Slotted | No |
| Fits | Subaru · 2 vehicles |
Vented design. Helps promote airflow for more consistent braking performance.
Cast iron construction. Full-cast rotor for dependable strength and heat handling.
Professional-grade quality. Manufactured in ISO-certified factories to meet fit, form, and function requirements.
Cross-references 26300FN000 for the same application. See all 1.
DuraGo BR902044 Front Brake Rotor
The DuraGo BR902044 is a vented front disc brake rotor built from cast iron for direct replacement service on select Subaru applications. It is engineered for fit, form, and function with a non-directional brake surface to support consistent pad contact on the 2024-2025 Subaru Impreza front axle.
Key Features
- Cast iron construction for dependable braking performance
- Vented rotor design for front brake heat management
- Non-directional brake surface for straightforward pad bedding
- Conventional full-cast rotor construction
- 5-bolt mounting pattern with 114.3 mm bolt circle
- Outside diameter: 293.5 mm; center hole diameter: 58 mm
- Nominal thickness: 24 mm; discard thickness: 22 mm
Detailed Product Overview
Built for front brake service, the DuraGo BR902044 rotor matches the dimensional requirements needed for select Subaru Impreza models and supports OE-style replacement needs. This rotor is a vented, conventional disc brake rotor with a full cast design, 5 mounting bolt holes, and a 293.5 mm outside diameter. It is a practical choice for drivers and technicians looking for a direct-fit front rotor for 2024-2025 Subaru Impreza applications. Part number BR902044 also cross-references 26300FN000 for the same application.
What This Rotor Helps Address
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced braking consistency from rotor wear beyond discard thickness
- Front brake heat buildup during repeated stops
- Noise and vibration related to rotor surface condition
- Fitment issues when replacing a damaged front rotor on a Subaru Impreza
Installation Notes and Tips
Verify rotor diameter, bolt pattern, center hole diameter, and thickness before installation. This rotor is listed for the front position on 2024-2025 Subaru Impreza models with a 294 mm rotor diameter note. Inspect pads, caliper hardware, and hub condition during service, and confirm the rotor surface is clean before bedding in new pads. BR902044 is a direct replacement part number for the listed application.
Quality Assurance
DuraGo has more than 45 years of aftermarket manufacturing experience, and its brake drum and rotor program is built for professional cataloging and application coverage. DuraGo products are produced in ISO-certified factories to meet fit, form, and function requirements.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2025 | Subaru | Impreza | Front | 294 mm Rotor Diameter |
| 2024 | Subaru | Impreza | Front | 294 mm Rotor Diameter |
| No rows match your filter. | ||||